User Manual

CHAPTER
DECK
DECK343
13
If there is a gap betweenadjacent clips, this may be retained by checkingthe ‘Gap Between Clips’
option.The‘CopytoBatchList’buttonwillincorporatethemanuallyenteredinformationintotheEDL,
allowing the user to modify the EDL information. Further information on the Batch List section can be
found later in this chapter.
Audio Options
While DaVinci Resolve is a color grading and enhancement system, it will record and play audio,
principally to be used as a guide track during grading or for preview of the completed Project. To ingest
audio,rstselectthe‘EnableAudioIngest’checkbox.Then,usingthepull-downmenu,selecttheSource
of the audio and then the number of audio Channels. You should also select the audio file Bit Depth and
then a file name and location to record the .wav file. Use the ’Browse’ button to select a location.
Folder Options
To select the location for storage of the mono or stereoscopic left images to be ingested, use the
Browse button in the Folder Options section, or just type in the path. The individual frames of video
will be labeled with their source timecode or the code you select, with the appropriate metadata as
you selected in the other sections of this tab. If you have a deck capable of playing stereoscopic 3D
imagesinrealtime,andhaveselectedthe‘EnableStereoVideo’checkboxonthecongurationtab,
deckcapturesection,youwillneedtospecifythedestinationtorecordtherighteye.Justclickinthe
‘Selected right eye clip’ window and select browse just as you do for a mono or left eye selection.
Capture
Byselecting‘Capture,’DaVinciResolvewillstarttheingestprocedure.Youcanmonitortheprogresson
theviewerandtheCaptureProgressbarandaborttheoperationbyselectingthe‘Abort’button.
For simple limited settings and no preroll recording, the ‘Crash Record’ button will record material
without a preroll. Once the ingest process is complete, the clips will be available in the folder you set
within your media storage. You can quickly check these within the Browse screen.
Disconnect
ToleavetheDeckscreenyoushoulddisconnectthedeckbyonceagainselectingthe‘Connect’button.
You must disconnect from the Deck to leave this screen.