User Manual

CHAPTER
DAVINCI RESOLVE CONTROL SURFACE
DAVINCI RESOLVE CONTROL SURFACE407
19
D: When using playheads this key selects deck D
I: This key is not implemented
E: When using playheads this key selects deck E
J: This key is not implemented
Shift Up: Use the Shift Up key as a pre-selector for the keys with an upper
option. Select the keys sequentially and do not hold the Shift Up key
while selecting the second key.
Preroll: The Preroll key us used in conjunction with the numerical keypad to
select a preroll time.
Cue: Selecting Cue will force the transport to the preroll position.
Previous Still: If you have a still selected the Previous Still key will select the
one preceding.
Next Still: The next still is selected if this key is used.
Play Still: When the user selects this key, DaVinci Resolve will automatically
display on the Viewer a wipe between the current scene and the
current still. You can use the fader T-bar to move the wipe position
and in the reference wipe menus change the reference image as
required by moving or resizing. Selecting Play Still a second time will
toggle this mode off.
Save: The most important key on the panel. Besides having an auto-save
feature you can and should consistently save your project with this
key. It only takes a few seconds and can save you hours.
Grab Still: At any time when you are grading selecting the Grab Still key will
automatically grab a full resolution frame from the timeline and
attach the node graph metadata for later display and use.