User Manual

CONFIGURATION 52
Creating a Facility Default Configuration
There are two default configurations in DaVinci Resolve: a User Default and a System Configuration.
To modify a System Configuration and save it as the default configuration for all new users, first login
asAdmin,thenselect‘SystemCong’withintheCongurationList,makethechangestotheproject
andusercongurationsandselect‘Save’.Allnewusersthatareaddedtothesystemwillautomatically
inherit these User default settings which can then be modified by the individual users and saved on a
per project or configuration basis.
Projects List
TheloggedinuserhasaProjectListtoshowallprojectsassociatedwiththatuser.Clickingonthe’+’
located to the left of the User ID will reveal the projects associated with that user. It also shows the date
onwhichtheprojectwasmodiedandtheprojectresolution.Byselectingthe’+’thatislocatedtothe
left of the project name, the project file and any associated sessions (EDLs) are also revealed.
There are a number of user controls in this window.
Add: Create new project.
Delete: When you select a project, then delete, that project will be deleted from the
database. Please be sure you wish to delete the project.
Load: The selected project in the project list will be loaded.
Save: Any changes that have been made into the selected project file are saved.
Save As: To save a project with an alternate name and thus create a new project file use
Save As.
Project List