User Manual

Blackmagic Micro Converters
Micro Converter SDI to HDMI
With Micro Converter SDI to HDMI you can connect a huge range of HDMI displays and video
projectors to SDI based equipment. Your Micro Converter SDI to HDMI automatically detects
between SD/HD/3G-SDI and converts to HDMI with embedded audio. This tiny broadcast
quality converter is protected by a strong aluminum chassis and powers over USB, meaning you
can power your Blackmagic Micro Converter via your laptop or television’s USB connector using
a common micro USB cable. Micro USB cables are used to connect some cell phones to
chargers and laptops, so if you have one of these, you can use the same cable. If the USB
connector on your cable is a different type, the correct cable can be purchased from most
electronic equipment stores.
Connectors
1 SDI In
Primary SDI input BNC connector.
2 SDI Loop
Loop through output of your SDI input BNC connector.
3 Micro USB / Power
Provides power from the included adapter or any device capable of providing 5V via
a standard USB to Micro USB cable, such as a laptop or television. Also connects to
Blackmagic Converters Setup software via your Mac OS X or Windows Computer.
4 HDMI Out
HDMI type A video output.
Blackmagic Converters Setup Settings
The Blackmagic Converters Setup utility can be used to change settings and update your
MicroConverter’s software. You can access these settings by moving between the ‘video’
and ‘about’ tabs.
The ‘about’ tab is detailed in the ‘changing settings’ section in this manual.
The ‘video’ tab for Micro Converter SDI to HDMI contains the following settings.
SDI IN
MicroConverter
SDI to HDMI
SDI LOOP OUT
HDMI OUT
1
3
2
4
14Blackmagic Micro Converters