User Manual

Embedding or Disabling Channels
Once you have selected your audio channels, use switches 4, 3, 2 and 1 to select which
channels to embed or disable. The disable setting lets you avoid overwriting audio channels
you wish to keep in the SDI signal.
For example, you can disable analog audio channel 1 or AES/EBU channels 1 and 2 by setting
switch 1 to the ON position. Alternatively, you can embed the audio channels by setting switch 1
to the OFF position.
Audio Channel De-Embed or Disable Settings
Switch Setting Audio Channels
4
ON Disable analog CH 4, AES/EBU CH 7 and 8
OFF Embed analog CH 4, AES/EBU CH 7 and 8
3
ON Disable analog CH 3, AES/EBU CH 5 and 6
OFF Embed analog CH 3, AES/EBU CH 5 and 6
2
ON Disable analog CH 2, AES/EBU CH 3 and 4
OFF Embed analog CH 2, AES/EBU CH 3 and 4
1
ON Disable analog CH 1, AES/EBU CH 1 and 2
OFF Embed analog CH 1, AES/EBU CH 1 and 2
The switch legend on the base of your converter gives you
alltheinformation you need to change conversion settings.
Mini Switch Settings Example:
Try experimenting with the switches. Select analog audio channels 1 to 4 by setting switches 8,
6 and 5 to the OFF position.
61Blackmagic Mini Converters