User Manual
The audio jack illustration on the previous page shows the jack connector’s positive,
negativeand ground wiring pins. Ifyou need to reverse the polarity of your analog audio
cableto suit your audio equipment, youcan simply swap the positive and negative wiring
onthe tip and ring pins.
NOTE If you are connecting stereo analog audio, it’s worth mentioning that if you
reverse the polarityfor one channel jack connector, make sure you do the same for the
second or your stereo analog audio will be out of phase.
Installing Administration Software
Installing Blackmagic Converters Setup
Blackmagic Converters Setup is used to change settings on your converter and to update your
converter’s internal software. The settings available will depend on the converter you are using.
However, some Blackmagic Converters don’t require any adjustable settings and don’t have
internal software, therefore these particular converters will not have a USB connector. If your
converter is one of these, you can go straight to your converter model in this manual to learn
more about it.
Blackmagic Converters Setup can be installed
on Mac OS X and Windows computers.
8Installing Administration Software