User Manual

5 ON BATT OFF

Switches battery power On or Off. When set to On, the Battery Converter will keep

working even if external power is lost. When set to Off, only external power is used to

ensure built in battery power is saved. The LED near the switch indicates the battery

charge level by a continuous illumination for 100 percent charge, three flashes for

50to90 percent charge, two flashes for 10 to 50 percent charge and a single flash if

less than 10 percent charge is remaining.

6 Power +12V

12 volt power supply input.

Battery Converter HDMI to SDI Block Diagram

Central

Processor and

Firmware

SDI Out

Automatic

SD/HD/3G-SDI

Cable Driver

Mini USB

HDMI In

Power

Battery

12-31V

Input

89Blackmagic Battery Converters