User manual

You can bypass channels or channel pairs if you want to avoid overwriting audio in your
SDI signal.
Your Teranex Mini will retain its last settings whether applied via switch, Smart Panel or
Blackmagic Teranex Setup. If reverting to switch control after removing the Smart Panel or
updating your converter’s settings via software, you may need to toggle individual switches
for new settings to take effect.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel on your Audio to SDI 12G converter,
the following menus will be available – ‘audio,’ and ‘network.’ The settings available in these
menus are identical to those detailed in the ‘Blackmagic Teranex Setup settings’ section above.
For more information on changing settings using the Teranex Mini Smart Panel, refer to the
‘changing settings’ section in this manual.
Using Teranex Mini Smart Panel gives you access to
the same settings as Blackmagic Teranex Setup.
Teranex Mini Audio to SDI 12G Block Diagram
Optical In
Equalizer,
Re-Clocker and
10 bit De-Serializer
SDI Audio
Embedder
Stereo Audio
Analog to Digital
Converter
AES/EBU
Audio Sample Rate
Converter
Serializer and
SDI Cable Driver
Central Processor
and Firmware
Mini Switches
Embedded
SDI Out
Ch 1 Analog or
Ch 1&2 AES/EBU
Stereo In
L
R
Ch 2 Analog or
Ch 3&4 AES/EBU
or Timecode
SDI In
USB
Analog or AES/EBU
Input automatically
detects between
SD/HD/6G/12G-SDI
Analog or AES/EBU
Ethernet
with Power
Analog
Digital
Teranex Mini – 12G–SDI to Quad SDI
Teranex Mini 12G-SDI to Quad SDI lets you convert a 12G-SDI signal to quad link SDI so you can
connect to Ultra HD equipment that use four separate BNC connectors. This conversion is
perfect if you need to connect 12G-SDI Ultra HD signals to four separate HD monitors, for
example large video wall displays. Your Teranex Mini includes a 12G-SDI loop through
connector and support for both level A and level B 3G-SDI equipment.
54Teranex Mini – 12G–SDI to Quad SDI