User's Manual

Noise Reduction
Command Command Description
Enabled: Enable Noise Reduction. False = OFF; True = ON
Bias: Adjust the Bias level. Range is -3 to +3
Split screen: Enable NR before/after split screen. False = OFF; True = ON
Red overlay: Enable NR Red Overlay. False = OFF; True = ON
Ping
Determine if the Teranex Server is responding.
Preset
Please note: PresetName0: refers to Preset 1, PresetName1: refers to Preset 2, etc.
Command Command Description
PresetName0: Displays all current user-defined preset names.
Command is used to assign a new nameto Preset 1.
PresetName1: Displays all current user-defined preset names.
Command is used to assign a new nameto Preset 2.
PresetName2: Displays all current user-defined preset names.
Command is used to assign a new nameto Preset 3.
PresetName3: Displays all current user-defined preset names.
Command is used to assign a new nameto Preset 4.
PresetName4: Displays all current user-defined preset names.
Command is used to assign a new nameto Preset 5.
PresetName5: Displays all current user-defined preset names.
Command is used to assign a new nameto Preset 6.
Recall: Recalls a previously saved preset, 1-6. (e.g. Recall: 1)
Save: Saves a new set of parameters to the designated preset,
1-6. (e.g. Save: 1)
Protocol Preamble
The Teranex Server will respond with the current protocol version.
Thisinformation cannot be changed by the user.
PROTOCOL PREAMBLE:
Version: 3.18
113113Developer Information