User's Manual

Command Command Description
Audio source: Select the audio input type. Values are model dependent.
Teranex 2D: Embedded, AES, RCA, DB25.
Teranex 3D: Embedded, AES, RCA, DB25.
Teranex Express: Embedded.
Teranex AV: Embedded, AES, RCA, DB25.
PCIe mode: For Teranex 2D and 3D: Display the status of the
Thunderbolt connection. Values are: Capture,
Playback, None.
Cannot be changed by the user.
Signal present: True indicates presence of input video.
False indicates no input video is present.
Cannot be changed by the user.
Timecode present: Detected indicates presence of timecode.
None indicates no timecode is present.
Cannot be changed by the user.
Closed captioning present: Detected indicates presence of closed captions.
None indicates noclosed captions arepresent.
Cannot be changed by the user.
Wide SD aspect: Values are: True or False. False indicates the SD source is
4:3. True indicates the SD source is widescreen and should
be displayed in an SD output in a Letterbox mode.
Optical module present: Indicates the presence of an installed fiber optic SFP
module. True=Installed; False=Not installed
Video pixel format: Displays input pixel format, e.g. YCrCb422.
Cannot be changed by the user.
Video Output
Command Command Description
Video mode: The Video Mode may be set to any available output video
format. Refer to the format conversion table for output
formats available in your Teranex. For example, 2160p59.94.
Aspect ratio: The Aspect Ratio value may be set to an aspect ratio
appropriate for the current conversion. Values are based
on availability in the device and the current conversion:
Anamorphic, Letterbox, CentreCut, 14x9, Smart.
Video demux mode: The Video demux mode applies to the Teranex 3D and
Teranex Express. Values are: SingleLink, DualLink, QuadLink.
This command corresponds with the ‘SDI Output’ LCD menu.
Output SDI mode: For Teranex AV and Teranex Express only, select the 3G-SDI
output type. Values are LevelA, LevelB. This command
corresponds with the ‘3G-SDI Output’ LCD menu.
Video pixel format: The Video pixel format applies to the Teranex 3D only.
Values are: YCbCr422, RGB422, RGB444.
Analog output: Select the analog video output type.
Values are: Composite, Component
117117Developer Information