Owner`s manual
CDP-500 Italian Hi-Tech CD Player
(Contents of Packaging )
1 PLAYER UNIT
1 REMOTE CONTROL
1 DETACHABLE AC POWER CHORD
INSTRUCTIONS AND WARRANTY CERTIFICATE .
(Construction features )
This section describes the special features of the CDP-500 CD Player , the construction features, the reasons for the
technical choices and the original ity of the design.
The CDP-500 is a CD Player made in a dimensionally standard rack chassis.
The chassis is particularly heavy to help dissipating vibration feedback.
The CDP-500 features four double triode tubes on the output stage
The CDP-500 features a tube power supply made with two double triodes .
The CDP-500 features four suspended Aluminium/Teflon feet to control acoustic feedback .
The Natural-Speed™ system ena bles the unit adjust the disc rotation speed depending on the effective need
improving the laser track ability.
The four transformers Super Linear Power Supply allows a precise and fine voltage setting in any specific critical
area of the electronic circu it where variations may affect the sound quality.
The Proprietary Digital to Analog converter allows the highest audio performance.
(Set-Up Instructions )
This section describes how to assemble and install your CDP-500 CD Player . The instructions are pure ly descriptive and
necessarily generic. If you have any doubts or difficulties with this procedure please contact your retailer who will know
how to assist you.
1) Open all the cartons inside the main box and look that all the components listed in the “conte nt section” are
present.
2) Carefully remove the CDP-500 CD Player chassis from the shipping box and foam.
3) Level carefully the unit on a solid shelf properly aerated to let the unit cool down.
4) Connect the audio cable (not supplied) to the amplifier. Note that the CDP-500 CD can be connected to RCA
unbalanced analog output or to the Balanced XLR analog outpu t both together .
5) The unit features a 24bit 75ohm coaxial digital output for eventual connection to external Digital/Analog
converters.
6) Connect the AC chord supplied.
CDP-500 back panel
Contents of Packaging - Construction Features 4