Owner`s manual

DSA150 SPECIAL Italian Hi-Tech Digital Stereo Amplifier
Technical Specifications
The following data describe the basic technical specifications of the DSA150 SPECIAL Digital Stereo Amplifier at the time of
drafting this manual. The specifications are subject to modification without notice. The product complies with the
requirements laid down in the EC regulations.
POWER OUTPUT: 2 X 150W Continuous Power at 8, 4, 2 & 1ohms
100% stability at 1ohm speaker load working
FREQUENCY RESPONSE: 10Hz – 50KHz @ +/- 3dB
THD (Total Harmonic Distortion): <0.01% THD @ 20Hz-20KHz
RATIO SIGNAL/NOISE >95dB
INPUT IMPEDANCE: 47Kohm
OUTPUT IMPEDANCE: 0,02ohm @ 1KHz
DYNAMIC POWER: >350W IHF
DYNAMIC RANGE: >120dB
DAMPING FACTOR: >400
MAX OUPUT NOISE: 80uV
INPUT: 3 x RCA Single End Inputs
3 x XLR Balanced Inputs
INPUT SENSIVITY: 450mV RMS
SLEW RATE: 15Volt/µs
PREAMP OUTPUT STAGE: True Separate stage – RCA OUT PINS
AMP IN STAGE: True Separate stage - RCA IN PINS
(disables the remote functions)
VOLUME COTROL: Double Mono Active Volume Control
DISPLAY: Switchable On/Off LED GIANT display
POWER ABSORBATION: Min. <1watt – Max.500watt
DIMENSION: 430mm L x 145mm H x 390mm D
(17” L x 5¾ ” H x 15 ½ D)
WEIGHT: 23Kilos (51Lbs.)
NOTES:Flat Load Independent Frequency Response design allows perfect speaker matching and stable frequency response
with all audio loudspeakers.
Technical details may vary without notice
Technical Specifications 8