Please refer to page 14-20-62 for specific product precautions. Water Separator Series AMG The AMG series water separator is installed on the air pressure line to remove water drops in the compressed air. It is suitable for use in cases where “water must be removed, but the air does not have to be as dry as when an air dryer is used” or “an air dryer cannot be used because an electric power supply is not available”.
Series AMG Flow Characteristics Element initial condition Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. ine wl . flo x Ma AMG450 Max. flow line Air flow rate (l /min (ANR)) Air flow rate (l /min (ANR)) 14B Max . flow AMG550 Pressure drop (MPa) Pressure drop (MPa) AMG250 line 34B Air flow rate (l /min (ANR)) 3 8B 1B AMG650 Pressure drop (MPa) Pressure drop (MPa) Max.
Water Separator Series AMG Construction AMG850 AMG150 to AMG650 Component Parts No. q w e Note) Refer to page 14-20-59 for “How to Order Bowl Assembly”. Material Note Aluminum die-casted Chrome treated Aluminum die-casted∗ Epoxy coating on inner surface Tempered glass Description Body Housing Sight glass ∗ AMG850 is aluminum casted. Replacement Parts No.
Series AMG AMG150 to AMG650 Dimensions Accessory D: With auto-drain (N.O.) Drain cock: Black One-touch fitting C: With auto-drain (N.C.) Drain cock: Gray One-touch fitting ∗ N.C. auto-drain not available for AMG650.
Water Separator Series AMG AMG850 Dimensions Accessory D: With auto-drain (N.O. type) for AMG850 female thread Bracket (Option) HA Maintenance space AT ID Drain AMG 3/8B female thread AFF AM Misc. Model AMG850 Port size A (Nominal size B) 1 2, 2 460.5 B C D E F G 42 348 220 57.5 220 10 H 463.5 I 180 J 30 Dimensions with mounting bracket K L M N O P 15 24 13 120 184 220 Q 110 R 18 S 6.
Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO 4414 Note 1), JIS B 8370 Note 2) and other safety practices. Caution : Operator error could result in injury or equipment damage. Warning : Operator error could result in serious injury or loss of life.
Common Precautions Be sure to read before handling. For detailed precautions on every series, refer to main text. Selection Warning 1. Confirm the specifications. Products represented in this catalog are designed for use in compressed air appllications only (including vacuum), unless otherwise indicated. Do not use the product outside their design parameters. Please contact SMC when using the products in applications other than compressed air (including vacuum). Mounting Warning 1.
Quality Assurance Information (ISO 9001, ISO 14001) Reliable quality of products in the global market To enable our customers throughout the world to use our products with even greater confidence, SMC has obtained certification for international standards “ISO 9001” and “ISO 14001”, and created a complete structure for quality assurance and environmental controls. SMC products pursue to meet its customers’ expectations while also considering company’s contribution in society.
SMC Product Conforming to Inter SMC products complying with EN/ISO, CSA/UL standards are supporting CE Mark The CE mark indicates that machines and components meet essential requirements of all the EC Directives applied. It has been obligatory to apply CE marks indicating conformity with EC Directives when machines and components are exported to the member Nations of the EU.
SMC Product Conforming to International Standards national Standards you to comply with EC directives and CSA/UL standards. Mark of compliance for CSA/UL Mark of compliance for CSA CSA Standards & UL Standards UL and CSA standards have been applied in North America (U.S.A. and Canada) symbolizing safety of electric products, and are defined to mainly prevent danger from electric shock or fire, resulting from trouble with electric products.
SMC’s Global Service Network America Europe U.S.A. SMC Corporation of America 3011 North Franklin Road Indianapolis, IN 46226, U.S.A. TEL: 317-899-4440 FAX: 317-899-3102 U.K. SMC Pneumatics (U.K.) Ltd. Vincent Avenue, Crownhill, Milton Keynes, MK8 0AN, Backinghamshire, U.K. TEL: 01908-563888 FAX: 01908-561185 CANADA SMC Pneumatics (Canada) Ltd.
SMC’s Global Service Network Europe Oceania/Asia FINLAND SMC Pneumatics Finland OY PL72, Tiistinniityntie 4, SF-02231 ESP00, Finland TEL: 09-8595-80 FAX: 09-8595-8595 AUSTRALIA SMC Pneumatics (Australia) Pty.Ltd. 14-18 Hudson Avenue Castle Hill NSW 2154, Australia TEL: 02-9354-8222 FAX: 02-9894-5719 NORWAY SMC Pneumatics Norway A/S Vollsveien 13C, Granfoss Næringspark N-1366 LYSAKER, Norway TEL: 67-12-90-20 FAX: 67-12-90-21 NEW ZEALAND SMC Pneumatics (New Zealand) Ltd. 8C Sylvia Park Road Mt.
Water Separator Series AMG Model Can remove water droplets in compressed air. Use this product in cases where “water must be avoided, but not so dry as when an air dryer is used”. Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a 99%∗ water removal rate∗∗ has been achieved. Caution Water separator can remove water droplets, but it cannot remove moisture. ∗ Condition of inlet air Pressure: 0.
Series AMG How to Order AMG150C to 550C AMG 550C 10 Body size Made to Order 150C 250C 350C 450C 550C (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Symbol Nil X15 X26 Description — With IN-OUT flange N.C., N.O. auto drain, drain piping type Page for details — P.69 P.70 Thread type Symbol Nil F N Option ∗3 Type Rc G∗1 Symbol Nil NPT F H J R V ∗1 Conforms to ISO1179-1.
Series AMG Water Separator How to Order AMG650/850 AMG 650 10 Body size Made to Order 650 850 (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Symbol Nil Thread type Symbol Nil F N X15 X26 X12 Type Rc G NPT Size Symbol Nil 10 14 20 1 11 2 2 Applicable body size 650 J R 850 B Description — Bracket ∗1 ∗1 Bracket is included, (but not assembled).
Series AMG Flow Characteristics Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. AMG150C AMG450C AMG850 x Ma Pressure drop (MPa) ine wl . flo Pressure drop (MPa) Pressure drop (MPa) Max. flow line Air flow rate (l /min (ANR)) AMG250C Air flow rate (l/min (ANR)) AMG550C low f ax. line M Pressure drop (MPa) Pressure drop (MPa) Max.
Water Separator Series AMG Construction AMG150C to 550C, AMG650 q IN AMG850 OUT IN OUT r w e Component Parts No. Material Description 1 Body Aluminum die-casted 2 Housing Aluminum die-casted∗ 3 Sight glass Tempered glass Note) Refer to “How to Order Bowl Assembly” on page 63. Note Chrome treated Epoxy coating on inner surface — Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction.
Series AMG Dimensions AMG150C to 550C Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) 34 Drain cock Gray: N.C. Black: N.O. O F R S P Q ø10 one-touch fitting Combination of D: With auto drain (N.O.
Water Separator Series AMG Dimensions AMG650 Auto drain D: With auto drain (N.O.) 180 12 76 34 136 160 4.
Series AMG Dimensions AMG850 Auto drain D: With auto drain (N.O.
Series AMF Spacer for Modular Connection Select a spacer from those listed below when combining modular type AFF2C to 22C, AM 150C to 550C. The spacer must be ordered separately. (Note: Spacer with bracket (Y200T to Y600T) cannot be used.) Caution Modular connection Mount the attached bracket on one side when connecting 2 sets. Mount the attached brackets on both sides when connecting 3 sets or more. As a guideline for the number of brackets, one bracket should be mounted for every 2 products.
Optional Accessory Piping Adapter E (Width across flats) Female thread side B Male thread side A D C Dimensions Thread type and port size Part no.
Bowl Assembly AFF-CA /AM -CA Bowl Assembly Bowl assembly for the AFF and AM series can be replaced without removing the main body from piping if the drain exhaust specification is to be changed from the drain cock type to the auto drain type or if the bowl has been damaged. How to Order Bowl Assembly AFF2C to 22C, AM, AMD, AMH, AMG150C to 550C AM CA Option Body size Symbol Nil 150C 250C 350C 450C 550C F H V Description — Rubber material: Fluororubber For medium air pressure (1.
Bowl Assembly AFF-CA /AM -CA How to Order Bowl Assembly AM, AMD, AMH, AMG Series AM CA 650 AMD AMH AMG Thread type Note 3) Symbol Nil F N Body size Type Rc G NPT Note 3) Corresponded to the drain exhaust symbol D and J. Select according to the body thread type. 650 850 Drain exhaust Symbol A D J Description With drain cock Note 1) With N.O. auto drain With drain guide Note 2) Note 1) Body size 850 is equipped with a ball valve (Rc3/8 female threaded).
AFF-CA /AM -CA Dimensions: AFF, AM, AMD, AMH, AMG Series Size: AFF2C to 22C, AFF37B, AM 150C to 550C, AM 650 (B) (B) 20 34 20 (C) (A) Note 1) (A) Note 1) 20 (A) Note 1) M5 female threaded (B) (B) 1/4 female threaded Drain 1/4 female threaded Note 2) For Rc, G: ø10 For NPT: 3/8 Drain Drain Drain Auto drain for medium air pressure Drain guide Drain cock Auto drain (mm) AFF series Size AM, AMD, AMG, AMH series Size A B C 2C 4C 8C 11C 22C 37B 150C 250C 350C 450C 550C 650 134 1
Bowl Assembly AFF-CA /AM -CA Dimensions: AME, AMF Series AME150C to 550C, AMF150C to 550C (A) (B) (mm) AME, AMF series Size A B 150 250 350 450 550 60 70 90 104 130 63 76 90 106 122 AME650/850, AMF650/850 (A) (B) (mm) AME, AMF series Size A B 650 850 225 319 160 120 66
Compressed Air Cleaning Filter Series Made to Order/Special Specifications Please consult with SMC for detailed specifications, size and delivery. Made to Order Applicable model Contents Symbol AFF 1. With Differential Pressure Gauge (GD40-2-01) 2. With Differential Pressure Switch (With Indicator) AM AMD AME AMF AMG AMH Reference page X6 P.68 X37 3. With IN-OUT Flange X15 4. With Pressure Differential Gauge (GD40-2-01), IN-OUT Flange X17 5. N.C., N.O.
Compressed Air Cleaning Filter Series Made to Order 2 Please consult with SMC for detailed specifications, size and delivery. 3. With IN-OUT Flange 4. With Differential Pressure Gauge (GD40-2-01), IN-OUT Flange Makes flange piping easier when filter ports on IN and OUT are flange connection. (Flange material: Carbon steel) The differential pressure gauge is mounted on the main body to monitor the life of a filter by checking its clogging status. Ports on IN and OUT are flange connection type.
Compressed Air Cleaning Filter Series Made to Order 3 Please consult with SMC for detailed specifications, size and delivery. 5. N.C., N.O. Auto Drain, Drain Piping Type 6. White Vaseline Specifications Drain piping type (drain guide specification) to the drain exhaust from N.C. auto drain and N.O. auto drain. N.C. type is not available for the AFF37B and AM 650. Changed the grease for O-rings and gaskets as lubricant to white vaseline.
Compressed Air Cleaning Filter Series Special Specifications Please consult with SMC for detailed specifications, size and delivery. Clean Series (10-Series) Copper-free, Fluorine-free (20-Series) Clean Series products are used in cleaner environments such as in clean rooms as compared to a general factory environment. For further details, refer to the Clean Series catalog. To eliminate effects on color CRTs, etc.
Related Products: Auto Drain Valve Series AD402/600 Model/Specifications Drain is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl guard is provided as standard equipment. Model Proof pressure Max. operating pressure Operating pressure range Note) Ambient and fluid temperature Port size Drain port size Mass (g) AD402 AD600 1.5 MPa 1.0 MPa 0.1 to 1.0 MPa –5 to 60°C (No freezing) 1 4, 3 8, 1 2 1.
Related Products: Auto Drain Valve Series AD402/600 Construction/Dimensions AD402 AD600 !4 Valve assembly q Body w O-ring q Body e Gauze u Lever Valve o w O-ring Chamber y i Piston assembly Float t !1 Spring Bowl !0 i Piston Long hole !2 of chamber r O-ring Drain guide !3 Drain Drain Component Parts Working Principle (AD402) • When no pressure is applied inside the bowl !0, float t descends of its own weight and valve o closes the chamber y hole.
Related Products: Motor Operated Auto Drain Series ADM200 Model/Specifications Reliably discharges even highly viscous drain • Highly resistant to dust and highly viscous drain, the valve opens and closes reliably to discharge the drain. High drain discharge capacity • With a large discharge port, a large amount of drain can be discharged in a single operation.
Related Products: Motor Operated Auto Drain Series ADM200 Mounting Example Compressor Aftercooler Air tank Main line filter Air dryer Construction/Dimensions e w Set screw r t q y Manual button Component Parts No. 1 2 Description Body Cap Replacement Parts Material Aluminum die-casted Aluminum die-casted Note Chrome treated Chrome treated No. Description 3 Note) Motor 4 Cam 5 6 Valve assembly O-ring Material — Part no.
Related Products: Heavy Duty Auto Drain Series ADH4000 Specifications Easy maintenance Float type Auto drain type Can maintain without removing the existing piping. Auto drain valve type No need for electric power and no waste of air. Proof pressure Float type auto drain allows automatic drain discharge without electric power. Operating pressure range Note) 0.05 to 1.6 MPa Fluid Compressed air Mounting example Aftercooler Air tank Air dryer N.O.
Related Products: Heavy Duty Auto Drain Series ADH4000 Construction !1 q o i u Component Parts w No. 1 y IN t r 10-1 e Description Body Material Note Aluminum alloy Baking finish 2 Housing Aluminum alloy Baking finish 3 Drain guard Aluminum alloy Baking finish 4 Float 5 Pilot valve 6 Lever Resin 7 Flushing button Brass 8 Orifice 9 Diaphragm No.
Series ADH4000 Dimensions M6 Hexagon socket head cap screw [Applicable hexagon wrench key nominal size 5] M6 Hexagon socket head cap screw [Applicable hexagon wrench key nominal size 5] 108 100 58 33 100 Pilot exhaust port Flushing button Bleed valve (Refer to “Maintenance” 4.) Bracket mounting hole 120 Drain inlet 1/2 female threaded (Refer to “How to Order” for type of thread.) 8 30 10 16 7 200 100 (Maintenance space) Bracket (Option) (Both sides) Model no.
Related Products: Differential Pressure Gauge Series GD40-2-01 Model/Specifications The pressure differential at the inlet and the outlet of compressed air equipment can be viewed at a glance on the differential pressure gauge. It is ideal for the maintenance control of filters. Compact and lightweight Can be installed easily by merely providing a bypass circuit. Provided with a protective cover to prevent hazards. GD40-2-01 Model Fluid Max.
Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC), Japan Industrial Standards (JIS)∗1) and other safety regulations∗2). ∗ 1) ISO 4414: Pneumatic fluid power – General rules relating to systems.
Safety Instructions Caution The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary. If anything is unclear, contact your nearest sales branch.
Series AM /AFF Specific Product Precautions 1 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Design Caution Warning 1. Design the layout so that the mist separator should be installed in an area that is less susceptible to pulsations. 1. Hold the female thread side and tighten to the recommended torque when screwing in the piping material.
Series AM /AFF Specific Product Precautions 2 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Selection Caution Piping Caution 1. About the system composition of purifying compressed air 1. Connect it with IN and OUT ports in proper location. It does not work with the connection reversed.
Series AM /AFF Specific Product Precautions 3 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Air Supply Caution Maintenance Caution 1. The mist separator is not applicable to gases other than compressed air. 1. Replace the element immediately when the time for its replacement has arrived.
Series AM /AFF Specific Product Precautions 4 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Maintenance Others Caution Caution 1. Element interchange • The auto drain operates when the drainage level reaches the top of the sight glass, and the drain will be discharged.
Series AM /AFF Specific Product Precautions 5 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Others Caution 5. Internal volume of filter container The product can be used as a small capacity air tank by removing the element. Following is the volume of filter containers of the AFF and AM series (when the element is removed).
SMC'S GLOBAL MANUFACTURING, DISTRIBUTION AND SERVICE NETWORK EUROPE AUSTRIA SMC Pneumatik GmbH (Austria) BELGIUM SMC Pneumatics N.V./S.A. BULGARIA SMC Industrial Automation Bulgaria Eood CROATIA SMC Industrijska Automatika d.o.o. CZECH REPUBLIC SMC Industrial Automation CZ s.r.o. DENMARK SMC Pneumatik A/S ESTONIA SMC Pneumatics Estonia OÜ FINLAND SMC Pneumatics Finland Oy FRANCE SMC Pneumatique SA GERMANY SMC Pneumatik GmbH GREECE SMC Hellas E.P.E. HUNGARY SMC Hungary Ipari Automatizálási Kft.
