Specifications

Water Separator
Series AMG
Made to Order
(For details, refer to page 67.)
Can remove water droplets in com-
pressed air. Use this product in ca-
ses where “water must be avoided,
but not so dry as when an air dryer is
used”.
Through the adoption of an element
that is exclusively used for removing
water droplets and the ample hous-
ing interior space, a 99%
water re-
moval rate
∗∗
has been achieved.
Caution
Water separator can remove water droplets, but
it cannot remove moisture.
Condition of inlet air
Pressure: 0.7 MPa
Temperature: 25°C
Relative humidity: 100%
Liquid water content (Water droplet
content): 15 g/m
3
(ANR)
Compressed air flow: Rated flow of each
model
∗∗ Water removal rate (%) =
Removed water (Water droplet) (g)
Inflowed water (Water droplet) (g)
Caution
Be sure to read this before handling.
Refer to back pages 1 and 2 for Safety Instructions, “Precautions for
Handling Pneumatic Devices” (M-03-E3A) for Common Precautions,
and back pages 3 through to 7 for Specific Product Precautions.
Rated flow (l/min (ANR))
Note)
Port size
Mass (kg)
Model
300
AMG150C
750
AMG250C
1500
AMG350C
2200
AMG450C
3700
AMG550C
6000
AMG650
12000
0.38 0.55 0.9 1.4 2.1 4.2 10.5
AMG850
Note) Max. flow at 0.7 MPa.
Max. flow varies depending on the operating pressure. Refer to “Flow Characteristics” (page 5)
and “Maximum Air flow” (page 6).
1
8,
1
4
1
4,
3
8
3
8,
1
2
1
2,
3
4
1
3
4,
11,
1
2
12
1
2,
Model
0.05 MPa
1.5 MPa
Fluid
Max. operating pressure
Min. operating pressure
Proof pressure
Ambient and fluid temperature
Water removal rate
Element life
Compressed air
1.0 MPa
5 to 60°C
99%
2 years or when pressure drop reached 0.1 MPa
With auto drain: 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type)
Specifications
AMG
Symbol
AMG150C AMG250C AMG350C AMG450C AMG550C
AMG650 AMG850
AM-BM101 AM-BM102 AM-BM103 AM-BM104 AM-BM105
BM56 BM57
Applicable model
Accessory
Bracket assembly
(with 2 mounting screws)
AMG150C to 550C AMG650/850
Modular connection is possible
with AMG150C to 550C.
(For details, refer to page 61.)
x 100
2