HT-1 Owner’s Manual Designed and Engineered by Blackstar Amplification UK
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. USA / Canada 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Warning! If the product does not operate normally, when the operating instructions are followed, then refer the product to a qualified service engineer. English READ THE FOLLOWING INFORMATION INSTRUCTIONS FOR FUTURE REFERENCE! CAREFULLY. SAVE English Important safety information! ALL The U.S.
English Features Thank you for purchasing this Blackstar HT-1 amplifier. Like all our products, this amp is the result of countless hours of painstaking Research and Development by our world-class design team. Based in Northampton (UK), the Blackstar team are all experienced musicians themselves and the sole aim of the development process is to provide guitarists with products which are the ultimate tools for self expression.
7. Speaker Emulated Output & Headphones This output emulates the tonal characteristics of a guitar speaker cabinet and provides a natural valve overdrive tone for connection to a recording device or mixing desk, and for use with headphones. To make full use of the stereo reverb, use a stereo jack to two mono jacks splitter lead to feed two channels of the recording device or mixer (see diagram below). The output will also function into a mono guitar type lead. Always use a good quality screened lead. 1.
Wichtige Informationen zur Sicherheit! LESEN SIE DIE FOLGENDEN INFORMATIONEN SORGFÄLTIG DURCH. BEWAHREN SIE ALLE ANLEITUNGEN FÜR DIE ZUKÜNFTIGE BEZUGNAHME AUF Befolgen Sie alle auf dem Produkt ausgewiesenen Warnungen und Anleitungen! Hohe Lautsprecherpegel können permanente Hörschäden verursachen. Sie sollten daher die direkte Nähe zu Lautsprechern, die auf hohen Pegeln betrieben werden, vermeiden. Tragen Sie einen Hörschutz, wenn Sie kontinuierlich hohen Pegeln ausgesetzt sind.
Einleitung Merkmale Vielen Dank, dass Sie sich für den Blackstar HT-1 Verstärker entschieden haben. Dieser Amp ist wie alle unsere Verstärker das Ergebnis unzähliger Stunden akribischer Arbeit durch unser erstklassiges Entwickler-Team. Blackstar hat seinen Sitz in Northampton (UK) und setzt sich aus einem Team erfahrener Musiker zusammen, die nur ein Ziel verfolgen: Gitarristen mit Werkzeugen zu versorgen, die ihnen dabei helfen, sich selbst zu verwirklichen.
Vorderseite 1. Eingang Hier schließen Sie Ihre Gitarre an. Verwenden Sie in jedem Fall hochwertige geschirmte Gitarrenkabel. schließen Sie ein Split-Kabel mit einem Stereoklinkenstecker an, der das Signal auf zwei Monostecker verteilt, um zwei Kanäle Ihres Aufnahmegeräts oder eines Mixers anzusteuern (siehe Abbildung unten). Der Ausgang kann aber auch mit einem einfachen Monokabel abgegriffen werden. Verwenden Sie in jedem Fall ein hochwertiges geschirmtes Kabel.
Consignes de sécurité importantes ! LISEZ LES INFORMATIONS SUIVANTES ATTENTIVEMENT. CONSERVEZ TOUTES LES CONSIGNES POUR RÉFÉRENCE ULTÉRIEURE ! À des niveaux élevés, le volume des enceintes peut causer des pertes auditives définitives. Par conséquent, évitez de rester à proximité des enceintes lorsque le volume est élevé. Portez des protecteurs d’oreilles en cas d’exposition continue à des niveaux sonores élevés.
Introduction Caractéristiques Merci d’avoir fait l’acquisition de cet ampli Blackstar HT-1. Comme tous nos produits il est le fruit de nombreuses heures de travail de la part de notre service de recherche et développement.
Panneau de réglages avant 7. Headphones & Speaker Emulated Output Cette sortie simule les caractéristiques sonores d’un baffle guitare et fournit un son ideal pour être connecté à du materiel d’enregistrement, une table de mixage ou un casque. Pour exploiter pleinement la reverb stéréo, utilisez une bretelle en "Y" avec un jack stéréo vers deux jacks mono pour entrer dans deux canaux de l'enregistreur ou de la table de mixage (voir schéma ci-dessous).
¡AVISO! Importante Información de seguridad ANTES DE ENCENDER UN CABEZAL, LA PANTALLA DEBERA ESTAR CONECTADA COMO SE DESCRIBE EN EL LIBRO DE INSTRUCCIONES UTILIZANDO LOS CONDUCTORES RECOMENDADOS POR EL FABRICANTE. LEA LAS SIGUIENTE INFORMACIÓN DETENIDAMENTE Y CONSERVE LAS INSTRUCCIONES PARA FUTURAS CONSULTAS. REEMPLAZE SIEMPRE LOS FUSIBLES CARACTERISTICAS IDENTICAS. SIGA TODOS LOS AVISOS E INSTRUCCIONES MARCACADAS EN LOS PRODUCTOS. NUNCA DESCONECTE EL PROTECTOR DE LA TOMA DE TIERRA.
Introducción Características Gracias por comprar este amplificador HT-1. Como todos nuestros productos , este ampli es el resultado de incontables horas de Investigación y Desarrollo de nuestro equipo de diseño. Con base en Northampton (UK), el equipo Blackstar son todos experimentados músicos y la única meta del proceso de desarrollo es proveer a los guitarritas con productos que sean las herramientas definitivas para su propia expresión.
Panel frontal estéreo, usa un cable con divisor con un jack estéreo en un extremo y dos jack mono en el otro para abastecer dos canales de grabación o mezcla (ver diagrama inferior). La salida también funcionará con un cable mono para guitarra. Utiliza siempre cables blindados de buena calidad. 1. Input Enchufa tu guitarra aquí. Usa siempre un cable apantallado de calidad. Nota: cuando el cable se conecte aquí, el altavoz interno del equipo se desconectará. 2.
Japanese Japanese 29 28
ߪߓߦ ਥߥ․ᓽ BLACKSTAR HT-1ࠕࡦࡊࡈࠔࠗࠕࠍ߅⾈ߍߚߛ߈ޕߔ߹ߑߏ߁ߣ߇ࠅߦ⺈ޔ ߎߩຠߪߩઁޔᒰ␠ߩຠห᭽ޔ⇇⊛ߦฬߥ⸳⸘࠴ࡓߦࠃࠅޔ㐳ᦼ㑆ߦࠊߚࠆ ᔀᐩߒߚ⎇ⓥ⺞ޔᩏࠍరߦ⸳⸘ߐࠇߡ߹ߔޕ HT-1ߪޔᣢߦቯ⹏ߩࠆHT-1⌀ⓨ▤ࠕࡦࡊߩ⚛᥍ࠄߒ࠻ࡦߣ↹ᦼ⊛ߥ․ᓽࠍ߃ߚ ޔ2࠴ࡖࡦࡀ࡞࠲ࠗࡊߩ࠻࠶ࡑࠜࡈࡉ࡞ࡃ࡞ࠝޔⓥᭂߩࡄ࠰࠽࡞ࠬ࠲ࠫࠝߘ ߒߡੱ✵⠌↪ߩࠕࡦࡊߢߔ⺧↳⸵․ޕਛߩISF(Infinite Shape Feature)ࠦࡦ࠻ࡠ࡞ߦࠃ ࠅUSAࠨ࠙ࡦ࠼߆ࠄUKࠨ࠙ࡦ࠼ߪߚ߹ޔਛ㑆ߩࠨ࠙ࡦ࠼ߥߤή㒢ߩࠨ࠙ࡦ࠼ࠠࡖࠢ࠲ ࠍࠅߛߔߎߣ߇ߢ߈߹ߔࠍࡦ࠻ߩߌߛߚߥޕࠅߍߦࠫࡔࠗߩߚߥޔ ࠆࡌࠬ࠻ߥࠨ࠙ࡦ࠼ߦ࠴ࡖࡦࠫߒߡߊߛߐޕ ⧷࿖ࡁࠩࡦࡊ࠻ࡦࠍὐߣߔࠆޔBLACKSTAR␠ߪోຬ߇ࡒࡘࠫࠪࡖࡦߣߒߡߩ⚻㛎 ߇ࠅࠍࠬࡦࡑࠜࡈࡄ࠻ࠬࡌߩ࠻ࠬ࠲ࠡޔታߔࠆߚߩޟⓥᭂߩࠡ࠲࠷࡞ޠ ࠍឭଏߔࠆߎߣࠍ໑৻ߩ⋡⊛ߣߒߡ߹ߔޕ ో
ࡈࡠࡦ࠻ࡄࡀ࡞ 7. SPEAKER EMULATED OUTPUT & HEADPHONES 1. INPUT ࠡ࠲ࠍធ⛯ߒ߹ߔޕߐߛߊߡߒ↪ࠍ࡞ࡉࠤߩ⾰⦟ޕ 2.
Especificaciones Técnicas HT-1 and HT-1R Combo HT-1RH Head HT-1 y HT-1R Combo HT-1RH Cabezal Power (RMS): 1 Watt Power (RMS): 1 Watt Potencia (RMS): 1 Watt Potencia (RMS): 1 Watt Valves: 1 x ECC83, 1 x ECC82 Valves: 1 x ECC83, 1 x ECC82 Válvulas: 1 x ECC83, 1 x ECC82 Válvulas: 1 x ECC83, 1 x ECC82 Weight (kg): 6 Weight (kg): 4 Peso (kg): 6 Peso (kg): 4 Dimensions (mm): 308 x 305 x 172 Dimensions (mm): 308 x 185 x 172 Dimensiones (mm): 308 x 305 x 172 Dimensiones (mm): 308 x 185 x 172 En
INPUT 1 10 0 EQ 10 0 POWER 10 LEVEL OVERDRIVE SELECT LEVEL ISF 2 3 4 5 HT 1 8 SPEAKER OUTPUT 100V 50/60Hz 25 WATTS CONNECT SPEAKERS BEFORE USE OUTPUT: 1 WATT RMS 1 x 8 OHM ON EMULATED MP3 / LINE OUTPUT & INPUT HEADPHONES 7 MAINS INPUT 9 Deutsch Deutsch VOLUME GAIN 0 HT-1 / HT-1R Combo Rear Panel English English HT-1 Combo Front Panel 10 Français Français FUSE 230V/240V - T160mAL 250V 100V/120V - T315mAL 250V HT-1R Combo Front Panel HT 1 0 10 0 EQ 10 0 REVERB 10
Français Français Español Español Deutsch Deutsch Japanese Japanese English English 39 38
HBK-1028 08/10 Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK For the latest information go to: www.blackstaramps.com Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.