HT CLUB 40 Owner’s Manual 1 Designed and Engineered by Blackstar Amplification UK
IMPORTANT SAFETY INSTRUCTIONS USA / Canada 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. 8. Install in accordance with the manufacturer’s instructions. 9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 10.
Warning! The U.S. Government´s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: English READ THE FOLLOWING INFORMATION INSTRUCTIONS FOR FUTURE REFERENCE! CAREFULLY. SAVE ALL Duration Per Day In Hours Sound Level dBA, Slow Response 8 90 Follow all warnings and instructions marked on the product! 6 92 Danger! High internal operating voltages.
English Features Thank you for purchasing this Blackstar HT Club 40 amplifier. Like all our products, this amp is the result of countless hours of painstaking Research and Development by our world-class design team. Based in Northampton (UK), the Blackstar team are all experienced musicians themselves and the sole aim of the development process is to provide guitarists with products which are the ultimate tools for selfexpression.
Front Panel English Plug your guitar in here. Always use a good quality screened guitar lead. 2. Clean Volume This controls the volume of the Clean Channel. Turning it clockwise increases the volume. 3. Clean Voice In the out position the Clean Channel has a ‘boutique’ voicing, more focussed to middle and top end, with the power amplifier damping configured like many traditional Class A type amplifiers.
English 6. Reverb Dark/Light 1. Mains Fuse In the out position the digital reverb is voiced to have a warm dark quality. When the Light position is selected the reverb has a brighter quality with more zing on the reverb tail. The value of the Mains Fuse is specified on the rear panel. Never use a fuse of the incorrect value or attempt to bypass it. 2. Mains Input The supplied detachable mains lead is connected here.
Wichtige Informationen zur Sicherheit! LESEN SIE DIE FOLGENDEN INFORMATIONEN SORGFÄLTIG DURCH. BEWAHREN SIE ALLE ANLEITUNGEN FÜR DIE ZUKÜNFTIGE BEZUGNAHME AUF Befolgen Sie alle auf dem Produkt ausgewiesenen Warnungen und Anleitungen! Gefahr! Hohe interne Betriebsspannungen Deutsch Nur mit einem trockenen Lappen reinigen Auf der Innenseite eines Verstärkers kann sich Kondensationsnässe bilden, wenn er von einer kalten Umgebung an einen wärmeren Ort bewegt wird.
Einleitung Merkmale Vielen Dank, dass Sie sich für den Blackstar HT Club 40 Verstärker entschieden haben. Dieser Amp ist wie alle unsere Verstärker das Ergebnis unzähliger Stunden akribischer Arbeit durch unser erstklassiges Entwickler-Team. Blackstar hat seinen Sitz in Northampton (UK) und setzt sich aus einem Team erfahrener Musiker zusammen, die nur ein Ziel verfolgen: Gitarristen mit den Werkzeugen zu versorgen, die ihnen dabei helfen, sich selbst zu verwirklichen.
Vorderseite 1. Input Hier schließen Sie Ihre Gitarre an. Verwenden Sie in jedem Fall ein hochwertiges geschirmtes Gitarrenkabel. 2. Clean Volume 3. Clean Voice Wenn dieser Schalter inaktiv ist (nicht gedrückt), bietet der Clean-Kanal ein ‚Boutique’-artiges Voicing mit einer Betonung des Mitten- und Höhenbereichs, während die Endstufen-Dämpfung an die Schaltung vieler klassischer Class-AVerstärker angelehnt ist.
16. Power-Leuchte Die Power-Kontrollleuchte ist aktiv, wenn Sie den Verstärker einschalten. 17. Standby Mit diesem Schalter aktivieren Sie die Ausgangsstufe. Schalten Sie den Standby frühestens 30 Sekunden nach dem Power-Schalter (18) ein. Während kurzer Spielpausen können Sie den Verstärkerausgang mit diesem Schalter an- und abschalten. Deutsch Mit diesem Schalter schalten Sie den Verstärker ein bzw. aus. Aktivieren Sie diesen Schalter in jedem Fall vor dem Standby-Schalter (17). Rückseite 1.
Consignes de sécurité importantes ! LISEZ LES INFORMATIONS SUIVANTES ATTENTIVEMENT. CONSERVEZ TOUTES LES CONSIGNES POUR RÉFÉRENCE ULTÉRIEURE ! Respectez tous les avertissements et toutes les consignes figurant sur le produit ! Si le produit ne fonctionne pas normalement alors que vous respectez la notice d’emploi, confiez-le à un réparateur qualifié.
Introduction Caractéristiques Merci d’avoir fait l’acquisition de cet amplificateur HT Club 40 Blackstar. Comme tous nos produits, cet ampli est le résultat d’innombrables heures de recherche et développement minutieux par notre équipe de conception, une des meilleures du monde. Basée à Northampton (R-U), l’équipe Blackstar est composée de musiciens chevronnés dont le seul but est de fournir aux guitaristes des produits qui soient leurs outils d’expression ultimes.
Face avant 9. Overdrive Volume 1. Entrée Cette commande règle le volume du canal Overdrive. La tourner dans le sens horaire augmente le volume. Branchez ici votre guitare. Utilisez toujours un câble de guitare blindé de bonne qualité. 3. Clean Voice 11. Middle En position relevée, le canal Clean a une harmonisation “boutique”, plus focalisée sur les médiums et les aigus, avec un amortissement de l’amplificateur de puissance configuré comme sur de nombreux amplificateurs traditionnels de Classe A.
16. Diode témoin d’alimentation Le témoin d’alimentation s’allume quand l’amplificateur est sous tension. 17. Standby Ce commutateur active l’étage de sortie. Enclenchez-le toujours au moins 30 secondes après l’interrupteur d’alimentation Power (18). Durant les courtes pauses de jeu, n’utilisez que ce commutateur pour mettre la sortie de l’amplificateur “hors” et “en” service. 18. Power Cet interrupteur sert à mettre l’amplificateur sous et hors tension.
¡AVISO! Importante Información de seguridad LEA LA SIGUIENTE INFORMACIÓN DETENIDAMENTE Y CONSERVE LAS INSTRUCCIONES PARA FUTURAS CONSULTAS. SIGA TODOS LOS AVISOS E INSTRUCCIONES MARCACADAS EN LOS PRODUCTOS. ¡PELIGRO! Alto voltaje interno. NO ABRA LA TAPA DEL EQUIPO. NO HAY PARTES UTILIZABLES PARA OTROS FINES EN ESTE EQUIPO. REMITA CUALQUIER ANOMALÍA AL SERVICIO TÉCNICO CUALIFICADO. UTILICE TRAPOS SECOS PARA LIMPIAR. REEMPLAZE SIEMPRE LOS FUSIBLES CARACTERISTICAS IDENTICAS.
Introducción Características Gracias por comprar este amplificador Blackstar HT Club 40. Como todos nuestros productos, este amplificador es el resultado de incontables horas de meticulosa Investigación y Desarrollo por parte de nuestro prestigioso equipo de diseño.
Panel frontal 9. Volumen del canal Overdrive 1. Entrada Este control ajusta el volumen del Overdrive Channel. Girarlo en sentido horario aumenta el volumen. Conecte su guitarra aquí. Use siempre un cable de guitarra blindado de buena calidad Controla el volumen del Clean Channel. Girarlo en sentido horario aumenta el volumen El control de graves ajusta la cantidad de frecuencias bajas en tu sonido.
16. Luz del indicador de alimentación La luz del indicador de alimentación se encenderá cuando el amplificador esté encendido. 17. Standby Este interruptor habilita la etapa de salida. Encienda siempre este interruptor por lo menos 30 segundos después del interruptor de alimentación (18). Durante pequeños descansos al tocar, use sólo este interruptor para “desactivar” y “activar” la salida del amplificador. 18. Alimentación Este interruptor se usa para activar y desactivar el amplificador.
Japanese Japanese 37 36
ߪߓߦ ߪߓߦ ਥߥ․ᓽ ਥߥ․ᓽ $NCEMUVCT *6 %NWD ࠕࡦࡊࡈࠔࠗࠕࠍ߅⾈ߍߚߛ߈ߑߏ߁ߣ߇ࠅߦ⺈ޔ $NCEMUVCT *6 %NWD ࠕࡦࡊࡈࠔࠗࠕࠍ߅⾈ߍߚߛ߈ߑߏ߁ߣ߇ࠅߦ⺈ޔ ߹ߔޕ ߹ߔޕ *6 %NWD ߪᐢ▸࿐ߥ↪ㅜ߿ࡊࠬ࠲ࠗ࡞ߦኻᔕߢ߈ࠆࡃࠨ࠲ࠗ࡞㧔ᨵエᕈ㧕ߩ *6 %NWD ߪᐢ▸࿐ߥ↪ㅜ߿ࡊࠬ࠲ࠗ࡞ߦኻᔕߢ߈ࠆࡃࠨ࠲ࠗ࡞㧔ᨵエᕈ㧕ߩ ࠆࠕࡦࡊߢߔޕ ࠆࠕࡦࡊߢߔޕ ߎߩຠߪߩઁޔᒰ␠ߩຠห᭽ޔᚒߩޘ⇇⊛ߦ߽࠻࠶ࡊࡌ࡞ߩ⸳⸘࠴ࡓߦࠃࠅ ߎߩຠߪߩઁޔᒰ␠ߩຠห᭽ޔᚒߩޘ⇇⊛ߦ߽࠻࠶ࡊࡌ࡞ߩ⸳⸘࠴ࡓߦࠃࠅ ޔ㐳ᦼ㑆ߦࠊߚࠆᔀᐩߒߚ⎇ⓥ⺞ޔᩏࠍరߦ⸳⸘ߒߡࠅ߹ߔޕ ޔ㐳ᦼ㑆ߦࠊߚࠆᔀᐩߒߚ⎇ⓥ⺞ޔᩏࠍరߦ⸳⸘ߒߡࠅ߹ߔޕ ⧷࿖ࡁࠩࡦࡊ࠻ࡦࠍὐߣߔࠆోߪ␠࠲ࠬࠢ࠶ࡉޔຬ߇ࡒࡘࠫࠪࡖࡦߣߒߡߩ ⧷࿖ࡁࠩࡦࡊ࠻ࡦࠍὐߣߔࠆోߪ␠࠲ࠬࠢ࠶ࡉޔຬ߇ࡒࡘࠫࠪࡖࡦߣߒߡߩ ⚻㛎߇ࠅࠍࠬࡦࡑࠜࡈࡄ
(TQPV 2CPGN (TQPV 2CPGN 1XGTFTKXG 8QNWOG 1XGTFTKXG 8QNWOG 1XGTFTKXG ࠴ࡖࡦࡀ࡞ߩ㖸㊂ࠍࠦࡦ࠻ࡠ࡞ߒ߹ߔޕฝߦ࿁ߔ߶ߤᄢ߈ߊߥࠅ߹ߔޕ 1XGTFTKXG ࠴ࡖࡦࡀ࡞ߩ㖸㊂ࠍࠦࡦ࠻ࡠ࡞ߒ߹ߔޕฝߦ࿁ߔ߶ߤᄢ߈ߊߥࠅ߹ߔޕ +PRWV +PRWV ߎߎߦࠡ࠲߆ࠄߩࠤࡉ࡞ࠍᝌߒߡߊߛߐޕᏱߦ⦟⾰ߩࠤࡉ࡞ࠍ߹ߒࠂ ߎߎߦࠡ࠲߆ࠄߩࠤࡉ࡞ࠍᝌߒߡߊߛߐޕᏱߦ⦟⾰ߩࠤࡉ࡞ࠍ߹ߒࠂ ߁ޕ ߁ޕ $CUU $CUU %NGCP 8QNWOG %NGCP 8QNWOG ૐၞࠍࠦࡦ࠻ࡠ࡞ߒ߹ߔߪࡊࡦࠕߩߎޕㅴᱠߒߚ࠻ࡦࠪࠚࠗࡊ࿁〝タߦࠃࠅᏀ ૐၞࠍࠦࡦ࠻ࡠ࡞ߒ߹ߔߪࡊࡦࠕߩߎޕㅴᱠߒߚ࠻ࡦࠪࠚࠗࡊ࿁〝タߦࠃࠅᏀ ࿁ࠅᣇะߢ࠲ࠗ࠻ߥಾࠇ⦟ࠨ࠙ࡦ࠼ޔฝ࿁ࠅᣇะߦ߹ࠊߔߣᥦ߆ߺߩࠆߤߞߒ ࿁ࠅᣇะߢ࠲ࠗ࠻ߥಾࠇ⦟ࠨ࠙ࡦ࠼ޔฝ࿁ࠅᣇะߦ߹ࠊߔߣᥦ߆ߺߩࠆߤߞߒ ࠅߣߒߚ࠻ࡦߦߥࠅ߹ߔޕ ࠅߣߒߚ࠻ࡦ
⼊๔㧦 ޟޓ1JOޟߪ࠻࠶ࡊ࠻࠙ࠕޠ㧝 1JO QT 1JOߪߣޠหᤨߦ⛘ኻߦ ⼊๔㧦 ޟޓ1JOޟߪ࠻࠶ࡊ࠻࠙ࠕޠ㧝 1JO QT 1JOߪߣޠหᤨߦ⛘ኻߦ ⼊๔㧦 ޟޓ1JOޟߪ࠻࠶ࡊ࠻࠙ࠕޠ㧝 1JO QT 1JOߪߣޠหᤨߦ⛘ኻߦ ↪ߒߥߢਅߐޕᱜߒࠗࡦࡇ࠳ࡦࠬࡑ࠶࠴ࡦࠣࠍᕃߞߚធ⛯ߪࠕࡦࡊࠍ㓚 ↪ߒߥߢਅߐޕᱜߒࠗࡦࡇ࠳ࡦࠬࡑ࠶࠴ࡦࠣࠍᕃߞߚធ⛯ߪࠕࡦࡊࠍ㓚 ↪ߒߥߢਅߐޕᱜߒࠗࡦࡇ࠳ࡦࠬࡑ࠶࠴ࡦࠣࠍᕃߞߚធ⛯ߪࠕࡦࡊࠍ㓚 ߐߖࠆߎߣ߇ࠅ߹ߔޕ ߐߖࠆߎߣ߇ࠅ߹ߔޕ ߐߖࠆߎߣ߇ࠅ߹ߔޕ 2QYGT +PFKECVQT .KIJV 2QYGT +PFKECVQT .KIJV 2QYGT +PFKECVQT .
CLEAN OVERDRIVE EQUALISATION REVERB MASTER 0 10 VOICE 10 TONE OD SELECT 0 10 GAIN VOICE 0 10 VOLUME 0 10 0 BASS 10 MIDDLE 0 10 0 TREBLE 10 ISF 0 10 LEVEL 0 10 POWER ON ON HT CLUB 40 VOLUME Français Français VOLUME 0 STANDBY HT Club 40 Rear Panel MODEL: HT CLUB 40 WARNING!: RISK OF HAZARDOUS ENERGY AVIS!: ENERGIE ELECTRIQUE DANGEREUSE! MAINS INPUT SPEAKER OUTPUTS H.T.
Français Français Español Español Deutsch Deutsch Japanese Japanese English English 47 46
HBK-1020 11/11 Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK For the latest information go to: www.blackstaramps.com Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement 1 and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.