53404M-1 01/20 Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK Owner’s Manual For the latest information go to: www.blackstaramps.com Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. USA / Canada 2. Keep these instructions. 7. Do not block any ventilation openings. 8. Install in accordance with the manufacturer’s instructions. 9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 10.
Important safety information! READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE! Follow all warnings and instructions marked on the product! Never disconnect the protective mains earth connection. High loudspeaker levels can cause permanent hearing damage. You should therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear hearing protection if continuously exposed to high levels.
English Features Thank you for purchasing this Blackstar Sonnet acoustic amplifier. Like all our products, this amp is the result of countless hours of painstaking Research and Development by our world-class design team. Based in Northampton (UK), the Blackstar team are all experienced musicians themselves and the sole aim of the development process is to provide guitarists with products which are the ultimate tools for self-expression.
Channel 1 1. Input 1 - 1/4" Jack Plug your instrument in here. This channel features a very high impedance input circuit (hi-Z). This is ideal for direct connection to instruments with piezo pickups. Always use a good quality screened instrument lead. 2. Phase This will reverse the phase of the signal within the preamp. Use this to help to suppress acoustic feedback. 3. Gain This controls the input gain of Channel 1. Turning it clockwise increases the input gain.
Adjust this trim pot to apply an increase or decrease to the higher frequencies of your amplifier’s output. At maximum settings this will result in a brighter, sharper response from your tone. At lower settings, the tone is warm and mellow. 19. Master This controls the overall volume of your amplifier. Turning it clockwise increases the volume. 20. Power Indicator Light The Power Indicator will light when the amplifier is switched on. 21.
The optional FS-17 footswitch, or any 2-way latching footswitch can be connected here. The first switch labelled 'Mute' will mute the whole amplifier, and the second switch labelled 'Reverb' will defeat the reverb on both channels. 28. Power Switch Technical Specification Sonnet 60 Power: 60 Watts Weight (kg): 7.7 This switch is used to turn the amplifier on and off. Dimensions (mm): 345mm (W) x 310mm (H) x 250mm (D) 29.
Sonnet 60 Black Front Panel English English Français Français Deutsch Deutsch Sonnet 60 Black Rear Panel 153670M-VA-3 MIX D.I. OUTPUT USB AUDIO MP3 / LINE IN FOOTSWITCH Japanese POWER Japanese GROUND LIFT Español Español SONNET 60 MODEL: 153100-VA MAINS INPUT 100V-240V~50/60Hz 115 WATTS Refer to the handbook for full operating details. This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).
Deutsch Français SHAPE MID HIGH REVERB Sonnet 60 N AT U R A L R E S P O N S E Sonnet 60 Blonde Rear Panel INPUT 2 GAIN LOW SHAPE HIGH REVERB HALL PLATE REVERB TIME MASTER H.P.
Français Français Español Español Deutsch Deutsch Japanese Japanese English English 88 87
Français Français Español Español Deutsch Deutsch Japanese Japanese English English 90 89