User manual

22
CAMMSYS BLACKBOX
※ Function can be changed according to product upgrade.
5-2 LED Indicator and Voice Guide
- Sound effect
Function Voice Guide
System start Starting the recording
System OFF
(Disconnecting power)
Terminating the system
Start recording None
End recording None
Connecting
/Disconnecting rear camera
None (System will be rebooted if you
connect rear camera while operating)
GPS satellite positioning None
Remove SD card while operating
None (System will be rebooted if you
connect rear camera while operating)
Without SD card
There is no SD card (Repeat, Reboot
once insert the SD card)
Manual SD card format
Formatting is on standby.
Press the left key to format
Proceed SD card format
(Event Key)
Formatting the SD card. Do not turn
off the power.
Security LED setting None
Function Voice Guide
Time signal
(In case of using Fixed time alarm)
1O’clock
Voice recording setting
Starting the voice recording
Disabling the voice recording
Convert to parking mode Switching to parking recording mode
Convert to normal mode from
parking mode
Switching to normal recording mode
Normal recording None
Manual recording Ding-dong, beep sound
Event recording Ding-dong, beep sound
Start Firmware upgrade None
Power OFF with High Temperature
cut-off function
None
Low voltage cut-off None
Volume (+)(-) Beep sound
Wi-Fi ON Ti-ting~ sound
Wi-Fi OFF Ti-ting! sound