User manual

CAMMSYS BLACKBOX

06 Firmware Update

6-1 Firmware Update

Please follow the below process in case of updating firmware.

① Remove SD card from the unit.

• Turn off the ignition first and remove cigar jack cable from the unit.

② Access our webpage (www.blacksys.co.kr/en > GET SUPPORT > Download) and download the latest update file.

③ Connect SD card to PC and paste downloaded latest update file (CH100update.zip) to the root of removable disk.

④ Insert SD card which contains latest update file to the unit.

• Turn on the ignition and connect cigar jack cable to the unit.

⑤ All LED is light on and update is initiating. Once finish the update, it starts recording automatically.

• Do not disconnect power cable while update is in process. It can cause malfunctioning.

6-2 Download (Firmware & PC viewer)

• Access our webpage (www.blacksys.co.kr/en > GET SUPPORT > Download) and download the latest update file and PC viewer.

• Complete program installation

※ You must connect internet to download firmware and PC viewer program.

※ Please check notice before update your product to avoid from changing in functions.