Technical data

BLADEOS 6.3 Command Reference
114
 Chapter 2: Information Commands BMD00186-B, April 2010
RMON Alarm Information
The following command displays RMON Alarm information:
show rmon alarm
Command mode:
All
The following table describes the RMON Alarm Information parameters.
RMON Alarm group configuration:
Index Interval Sample Type rLimit fLimit last value
----- -------- ------ ------- ----------- ----------- ----------
1 1800 abs either 0 0 7822
Index rEvtIdx fEvtIdx OID
----- ------- ------- -------------------------------------------
1 0 0 1.3.6.1.2.1.2.2.1.10.1
Index Owner
----- ---------------------------------------------
1 dan
Table 53 RMON Alarm Parameter Descriptions
Parameter Description
Index Displays the index number that identifies each alarm instance.
Interval Displays the time interval over which data is sampled and compared with
the rising and falling thresholds.
Sample Displays the method of sampling the selected variable and calculating the
value to be compared against the thresholds, as follows:
 abs—absolute value, the value of the selected variable is
compared directly with the thresholds at the end of the sampling
interval.
 delta—delta value, the value of the selected variable at the last
sample is subtracted from the current value, and the difference
compared with the thresholds.
Type Displays the type of alarm, as follows:
 falling—alarm is triggered when a falling threshold is crossed.
 rising—alarm is triggered when a rising threshold is crossed.
 either—alarm is triggered when either a rising or falling
threshold is crossed.