Technical data

BMD00186-B, April 2010 137
CHAPTER 3
Statistics Commands
You can use the Statistics Commands to view switch performance statistics in both the user and
administrator command modes. This chapter discusses how to use the command line interface to
display switch statistics.
Table 67 Statistics Commands
Command Syntax and Usage
show layer3 counters
Command mode: All
Displays Layer 3 statistics.
show snmp-server counters
Command mode: All
Displays SNMP statistics. See page 194 for sample output.
show ntp counters
Displays Network Time Protocol (NTP) Statistics.
Command mode: All
See page 198 for a sample output and a description of NTP Statistics.
show counters
Dumps all switch statistics. Use this command to gather data for tuning and debugging switch
performance. If you want to capture dump data to a file, set your communication software on
your workstation to capture session data prior to issuing the dump command.
Command mode: All
For details, see page 199.