Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
261262263264265266267268269270
BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
263
Port Mirroring
Port mirroring is disabled by default. For more information about port mirroring on the G8124, see
“Appendix A: Troubleshooting” in the BLADEOS 6.3 Application Guide.
Port Mirroring commands are used to configure, enable, and disable the monitor port. When
enabled, network packets being sent and/or received on a target port are duplicated and sent to a
monitor port. By attaching a network analyzer to the monitor port, you can collect detailed
information about your network performance and usage.
Table 153 Port Mirroring Configuration Commands
Command Syntax and Usage
[no] port-mirroring enable
Enables or disables port mirroring.
Command mode: Global configuration
show port-mirroring
Displays current settings of the mirrored and monitoring ports.
Command mode: All except User EXEC