Technical data

BLADEOS 6.3 Command Reference
296
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Hot Links Trigger Configuration
Table 180 Hot Links Trigger Configuration Commands
Command Syntax and Usage
hotlinks trigger <1-25> forward-delay <0-3600>
Configures the Forward Delay interval, in seconds. The default value is 1.
Command mode: Global configuration
hotlinks trigger <1-25> name <1-32 characters>
Defines a name for the Hot Links trigger.
Command mode: Global configuration
[no] hotlinks trigger <1-25> preemption
Enables or disables pre-emption, which allows the Master interface to transition to the Active
state whenever it becomes available.
The default setting is enabled.
Command mode: Global configuration
[no] hotlinks trigger <1-25> enable
Enables or disables the Hot Links trigger.
Command mode: Global configuration
no hotlinks trigger <1-25>
Deletes the Hot Links trigger.
Command mode: Global configuration
show hotlinks trigger <1-25>
Displays the current Hot Links settings.
Command mode: All