Technical data

BLADEOS 6.3 Command Reference
358
 Chapter 4: Configuration Commands BMD00186-B, April 2010
BGP Aggregation Configuration
These commands enable you to configure BGP aggregation to specify the routes/range of IP
destinations a peer router accepts from other peers. All matched routes are aggregated to one route,
to reduce the size of the routing table. By default, the first aggregation number is enabled and the
rest are disabled.
[no] neighbor <1-16> redistribute static
Enables or disables advertising static routes.
Command mode: Router BGP
show ip bgp neighbor <1-16> redistribute
Displays current redistribution configuration.
Command mode: All except User EXEC
Table 222 BGP Aggregation Configuration Commands
Command Syntax and Usage
aggregate-address <1-16> <IP address> <IP netmask>
Defines the starting subnet IP address for this aggregation, using dotted decimal notation. The
default address is 0.0.0.0.
Command mode: Router BGP
aggregate-address <1-16> enable
Enables this BGP aggregation.
Command mode: Router BGP
no aggregate-address <1-16> enable
Disables this BGP aggregation.
Command mode: Router BGP
Table 221 BGP Redistribution Configuration Commands
Command Syntax and Usage