Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 7: Maintenance Commands
 431
IP Route Manipulation
Note – To display all routes, you can also refer to “IP Routing Information” on page 77.
Table 273 IP Route Manipulation Commands
Command Syntax and Usage
show ip route address <IP address>
Shows a single route by destination IP address.
Command mode: All except User EXEC
show ip route gateway <IP address>
Shows routes to a default gateway.
Command mode: All except User EXEC
show ip route type {indirect|direct|local|broadcast|
martian|multicast}
Shows routes of a single type.
Command mode: All except User EXEC
For a description of IP routing types, see Table 34 on page 78
show ip route tag {fixed|static|address|rip|ospf|broadcast|
martian|multicast}
Shows routes of a single tag.
Command mode: All except User EXEC
For a description of IP routing tags, see Table 35 on page 79
show ip route interface <IP interface>
Shows routes on a single interface.
Command mode: All except User EXEC
show ip route
Shows all routes.
Command mode: All except User EXEC
clear ip route
Clears the route table from switch memory.
Command mode: All except User EXEC