Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 161
/cfg/sys/errdis
System Error Disable and Recovery Configuration
The Error Disable and Recovery feature allows the switch to automatically disable a port if an error
condition is detected on the port. The port remains in the error-disabled state until it is re-enabled
manually, or re-enabled automatically by the switch after a timeout period has elapsed. The
error-disabled state of a port does not persist across a system reboot.
[System ErrDisable Menu]
timeout - Set ErrDisable timeout (sec)
ena - Enable ErrDisable recovery
dis - Disable ErrDisable recovery
cur - Display current ErrDisable configuration
Table 73 Error Disable Configuration Options
Command Syntax and Usage
timeout <30 - 86400>
Configures the error-recovery timeout, in seconds. After the timer expires, the switch
attempts to re-enable the port. The default value is 300.
Note: When you change the timeout value, all current error-recovery timers are reset.
ena
Globally enables automatic error-recovery for error-disabled ports. The default setting is
disabled.
Note: Each port must have error-recovery enabled to participate in automatic error recovery
(/cfg/port x/errdis/ena).
dis
Globally disables error-recovery for error-disabled ports.
cur
Displays the current system Error Disable configuration.