Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 201
/cfg/port <port alias or number>/gig
Port Link Configuration
Port link menu options are described in the following table.
[Gigabit Link Menu]
speed - Set link speed
mode - Set full or half duplex mode
fctl - Set flow control
auto - Set autonegotiation
cur - Display current gig link configuration
Table 101 Port Link Configuration Options
Command Syntax and Usage
speed 10|100|1000|10000|any
Sets the link speed. Some options are not valid on all ports. The choices include:
 10 Mbps
 100 Mbps
 1000 Mbps
 any (auto negotiate port speed)
Note: Data ports are fixed at 10000 Mbps.
mode full|half|any
Sets the operating mode. Some options are not valid on all ports. The choices include:
 Full-duplex
 Half-duplex
 “Any,” for auto negotiation (default)
Note: Data ports are fixed at full duplex.
fctl rx|tx|both|none
Sets the flow control. The choices include:
 Receive flow control
 Transmit flow control
 Both receive and transmit flow control (default)
 No flow control