Technical data

BLADE OS 5.0 Command Reference
BMD00142, November 2009 Chapter 6: The Configuration Menu
 203
/cfg/port <port alias or number>/stp
Port Spanning Tree Configuration
[Port 1 STP Menu]
edge - Enable/disable edge port
link - Set port link type (for PVRST only)
cur - Display current port stp configuration
Table 103 Port STP Options
Command Syntax and Usage
edge e|d
Enables or disables this port as an edge port. An edge port is not connected to a bridge, and
can begin forwarding traffic as soon as the link is up. Configure server ports as edge ports
(enabled).
link auto|p2p|shared
Defines the type of link connected to the port, as follows:
 auto: Configures the port to detect the link type, and automatically match its settings.
 p2p: Configures the port for Point-To-Point protocol.
 shared: Configures the port to connect to a shared medium (usually a hub).
cur
Displays current STP parameters for the port.