Technical data

BLADE OS 5.0 Command Reference
290
 Chapter 6: The Configuration Menu BMD00142, November 2009
/cfg/l3/igmp/igmpflt/port <port number>
IGMP Filtering Port Configuration
Table 173 describes the commands used to configure a port for IGMP filtering.
[IGMP Port 1 Menu]
filt - Enable/disable IGMP filtering on port
add - Add IGMP filter to port
rem - Remove IGMP filter from port
cur - Display current IGMP filtering Port configuration
Table 173 IGMP Filter Port Options
Command Syntax and Usage
filt enable|disable
Enables or disables IGMP filtering on this port.
add <filter number (1-16)>
Adds an IGMP filter to this port.
rem <filter number (1-16)>
Removes an IGMP filter from this port.
cur
Displays the current IGMP filter parameters for this port.