Technical data

BLADE OS 5.0 Command Reference
324
 Chapter 9: The Maintenance Menu BMD00142, November 2009
/maint/arp
ARP Cache Maintenance
Note – To display all ARP entries currently held in the switch, or a portion according to one of the
options listed on the menu above (find, port, vlan, dump), you can also refer to “ARP
Information” on page 85.
[Address Resolution Protocol Menu]
find - Show a single ARP entry by IP address
port - Show ARP entries on a single port
vlan - Show ARP entries on a single VLAN
addr - Show ARP entries for switch's interfaces
dump - Show all ARP entries
clear - Clear ARP cache
Table 191 ARP Maintenance Options
Command Syntax and Usage
find <IP address (such as, 192.4.17.101)>
Shows a single ARP entry by IP address.
port <port alias or number>
Shows ARP entries on a single port.
vlan <VLAN number>
Shows ARP entries on a single VLAN.
addr
Shows the list of IP addresses which the switch will respond to for ARP requests.
dump
Shows all ARP entries.
clear
Clears the entire ARP list from switch memory.