User Manual

The Blade

3 50 QX Firmware 2.0 includes two adhesive-backed,

metal-foil sheets to provide GoPro

users with an extra measure

of RF-shielding.

Blade

350 QX 2.0 Copper Foil Shielding Instructions

1. Fold the inner “T” sheet (A) around the camera with the metallic side

facing away from the camera so it covers the top, sides and back.

DO NOT peel off the backing.

2. Peel the backing off the rectangular sheet (B).

3. Wrap sheet B around the back of sheet A, sealing all the rear edges

and holding everything together.

4. The shield is removable and is held in place by the 350 QX camera

mount.

The front and bottom of the camera are left unshielded to allow any RF

noise to radiate out and away from the 350 QX.

Blade is a registered trademark of Horizon Hobby, LLC.

45221 Created: 03/2014