User Manual

OIL

Step T6a

• Glue the torque tube bearings in place by placing a

thin bead of CA on the torque tube at the given loca-

tions (200mm, 200mm), then slide the bearings onto

the CA. Do not allow CA to get into the bearings.

• Use oil on the outside of the torque tube bearing

holders to ease installation into the boom.

• The stepped side of the washer faces the radial

bearing.

Tail rotor blade

removed for clarity

214 mm 200 mm 200 mm

Step T5Step T5 parts (bag T6)

Step T6a parts (bag T7)

Tail Assembly cont’d

Button head screw

M3 X 5 (x2)

Cap head bolt M3 X 25

M3 Step washer (x4)

Control ball

M3 Lock nut

viewed from back