Instruction manual

ManualsBrandsBlade ManualsBaby Care600X series

Throttle Hold

When you move the throttle hold switch to the ON position, the helicopter motor

turns off. You will still have control of the helicopter cyclic and rudder commands.

The blades spin if throttle hold is OFF. For safety, turn throttle hold ON any time

you need to touch the helicopter or check the direction controls.

You should also turn throttle hold ON to minimize damage if the helicopter is out

of control or in danger of crashing.

IMPORTANT: the speed control shipped with your Blade 600 X is pre-pro-

grammed for this helicopter. If you wish to use the auto rotation bailout feature in

the speed control, follow this process.

1. Disengage the motor by either removing the pinion gear or sliding the motor

so the pinion does not engage the main gear.

2. Power on your transmitter and then plug the battery into the speed control.

3. Activate throttle hold

4. Increase the throttle hold value until the motor begins to turn. Reduce the

value until the motor stops.

See your transmitter manual for more information on programming throttle hold.

SYSTEM LIST

Model Type

HELI

Swash Type

1 Servo 90

FUNCTION MODE

D/R & EXP

0-AILE 100% 0%

0-ELEV 100% 0%

0-RUDD 100% INH

1-AILE 85% 0%

1-ELEV 85% 0%

1-RUDD 85% INH

Thro Curve

NORM 0% 25% 25% 25% 25%

ST-1 75% 75% 75% 75% 75%

ST-2 100% 100% 100% 100% 100%

HOLD 0% 0% 0% 0% 0%

Pitc Curve

NORM 30% INH 50% INH 100%

ST-1 0% INH 50% INH 100%

ST-2 0% INH 50% INH 100%

HOLD 0% INH 50% INH 100%

Travel Adj

THRO 100%

AILE 100%

ELEV 100%

RUDD 100%

GEAR 100%

PIT. 100%

Reversing SW

THRO N RUDD N

AILE R GEAR N

ELEV R PIT. N

Gyro SENS

AUTO F.MODE

STNT 71.5%

HOLD 71.5%

Timer

4:00

DX7/DX7se

DX6i

Programming Your Transmitter

Program your transmitter before attempting to bind or ﬂ y the helicopter. Transmitter programming values are shown below for the Spektrum DX6i, DX7/DX7se,

DX7s, DX8, and DX18. The ﬁ les for models using Spektrum

transmitters with AirWare™ software are also available for download online in the Spektrum Community.

SETUP LIST

Model Type

HELI

Reverse

THRO N

AILE R

ELEV R

RUDD N

GYRO N

PITC R

Swash Type

1 Servo 90

Timer

4:00

ADJUST LIST

D/R & Expo

0-AILE 100% 0%

0-ELEV 100% 0%

0-RUDD 100% INH

1-AILE 85% 0%

1-ELEV 85% 0%

1-RUDD 85% INH

Thro Curve

NORM 0% 25% 25% 25% 25%

STUNT 100% 100% 100% 100% 100%

HOLD 10% 10% 10% 10% 10%

Pitc Curve

NORM 30% 40% 50% 75% 100%

STUNT 0% 25% 50% 75% 100%

HOLD 0% 25% 50% 75% 100%

Travel Adj

THRO 100%

AILE 100%

ELEV 100%

RUDD 100%

GYRO 100%

PITC 100%

Gyro

Rate SW-F. Mode

NORM 71.5%

STUNT 71.5%

SYSTEM SETUP

Model Type

HELI

Swash Type

1 Servo Normal

F-Mode Setup

Flight Mode: F Mode

Hold: Hold

Frame Rate

11ms

DSMX

FUNCTION LIST

D/R & Expo

0-AILE 100% 0%

0-ELEV 100% 0%

0-RUDD 100% 0%

1-AILE 85% 0%

1-ELEV 85% 0%

1-RUDD 85% 0%

2-AILE 85% 0%

2-ELEV 85% 0%

2-RUDD 85% 0%

Throttle Curve

NORM 0% 25% 25% 25% 25%

ST-1 75% 75% 75% 75% 75%

ST-2 (DX8/18 only) 100% 100% 100% 100% 100%

HOLD 0% 0% 0% 0% 0%

Pitch Curve

NOR 30% 40% 50% 75% 100%

ST-1 0% 25% 50% 75% 100%

ST-2 (DX8/18 only) 0% 25% 50% 75% 100%

HOLD 0% 25% 50% 75% 100%

Reverse

THRO N

AILE R

ELEV R

RUDD N

GEAR N

PIT. N

Timer

MODE Countdown

TIME 4:00 Tone/Vibe

START Throttle Out

POS 25

Gyro

SW F Mode

CH Gear

NORMAL/POS 0 68%

STUNT 1/POS 1 68%

STUNT 2/POS 2 68%

HOLD 68%

SERVO SETUP

Travel

THRO 100%

AILE 100%

ELEV 100%

RUDD 100%

GEAR 100%

PIT. 100%

DX7s/DX8/DX18