Instruction Manual Bedienungsanleitung Manuel d’utilisation Manuale di Istruzioni RTF
FR REMARQUE La totalité des instructions, garanties et autres documents est sujette à modification à la seule discrétion d’Horizon Hobby, LLC. Pour obtenir la documentation à jour, rendez-vous sur le site horizonhobby.com et cliquez sur l’onglet de support de ce produit.
FR Table des matières Préparation au premier vol ................................................. 32 Procédure de vol ................................................................ 32 Installation des hélices....................................................... 32 Installation des piles de l’émetteur (RTF) ............................ 32 Avertissements relatifs à la charge .................................... 33 Charge de la batterie (RTF) ................................................
FR Préparation au premier vol Procédure de vol • Sortez tous les éléments de la boîte et inspectez-les • Mettez la batterie en charge • Assemblez le modèle • Programmez votre émetteur • Installez la batterie totalement chargée dans le modèle • Affectez votre émetteur • Familiarisez-vous avec les commandes • Choisissez un endroit approprié pour le vol ❏ Mettez toujours l’émetteur sous tension en premier ❏ Branchez la batterie à la prise du contrôleur ❏ Patientez durant l’initialisation du contrôleur ❏ Ef
FR Avertissements relatifs à la charge • Chargez toujours les batteries à l’écart de tout matériau inflammable. • Contrôlez toujours l’état de la batterie avant la charge. • Déconnectez toujours la batterie quand la charge est terminée et laissez le chargeur refroidir entre deux charges. • Surveillez toujours la température de la batterie durant la charge. • UTILISEZ UNIQUEMENT UN CHARGEUR CONÇU POUR CHARGER LES BATTERIES LI-PO.
FR Paramétrage de l’émetteur L’émetteur Spektrum DXe inclus est programmé en usine. Si nécessaire, téléchargez les paramètres du modèle disponibles sur www.spektrumrc.com. DX6, DX6e, DX7 (Gen 2), DX8 (Gen 2), DX9, iX12, DX18, DX20 VALEURS LISTE DES PARAMÈTRES Type de modèle Avion Mode de vol Interrupteur 1 Interrupteur 2 Inactif Inactif Assignation voie Configuration entrée voie 1 Gaz 2 Ailerons 3 Profondeur 4 Dérive 5 Train Inter. B 6 Aux 1 Inter.
FR Affectation de l’émetteur et du récepteur L’émetteur prêt-à-voler inclus est affecté à l’appareil dans l’usine. Si vous devez le réaffecter pour une quelconque raison, suivez la procédure d’affectation comme indiqué. Pour affecter ou ré-affecter votre hélicoptère à l’émetteur de votre choix, veuillez suivre les instructions suivantes. Procédure d’affectation 1. Sélectionnez le modèle correct dans votre émetteur. 2. Éteignez votre émetteur. 3. Abaissez entièrement les gaz. 4.
FR Compréhension des commandes de vol de base Si vous n’avez pas encore bien assimilé les commandes de votre quadcoptère, prenez quelques minutes pour vous familiariser avec elles avant de tenter votre premier vol.
FR Utilisation de l’émetteur vidéo Consultez les lois et ordonnances de votre région avant d’utiliser l’équipement FPV. Certaines régions peuvent limiter ou interdire l’utilisation de l’équipement FPV. L’utilisation de ce produit d’une façon légale et responsable est sous votre entière responsabilité. Boutons Fenêtre DEL Voir le tableau des fréquences disponibles pour trouver le canal et la bande vidéo souhaités.
FR Caractéristiques du moniteur vidéo 109mm avec DVR Prise antenne omnidirectionnelle 5,8GHz Bouton Menu: Utilisez les boutons + et - pour modifier: Luminosité Contraste Couleur Mode (16:9, 4:3) Langues Réinitialisation Bouton de sélection de fréquence Une simple pression pour changer de fréquence Entrée AV Bouton de sélection de bande de fréquence Une simple pression pour changer de bande de fréquence Micro carte mémoire la fente Port de charge micro USB 5V Interrupteur ON/Off DEL de statut de charge Roug
FR Préparation au vol du quadcoptère Scimitar 170 1. Avant chaque vol, mettez TOUJOURS l’émetteur sous tension avant de connecter la batterie au quadcoptère. Après chaque vol, déconnectez la batterie du quadcoptère avant de mettre l’émetteur hors tension. REMARQUE: La connexion de la batterie avant la mise sous tension de l’émetteur peut déclencher la procédure d’affectation. Veuillez consulter la section Affectation de l’émetteur au récepteur de ce manuel pour plus d’informations. 2.
FR Guide de dépannage AVERTISSEMENT: Retirez les hélices du modèle avant d’effectuer la maintenance ou des réparations. Le non-respect de cette consigne pourrait causer des blessures si les moteurs démarrent accidentellement.
FR Vue éclatée 3 4 12 2 9 11 1 6 10 5 8 2 1 6 13 7 12 Liste des pièces détachées 1 2 3 4 Référence LH02301 BLH02303 BLH02304 BLH02306 5 BLH02308 6 BLH02309 7 BLH9403 8 BLHA1026 9 SPM4649T Description Structure centrale : Scimitar 215, 170 Ensemble bras (4) : Scimitar 170 Module avec DEL : Scimitar 215, 170 Hélices FPV 10 cm (4 po) (4) Variateur ESC d’hélicoptère sans balais 4-en-1 : Scimitar 170 Ensemble protections d’hélices : Scimitar 170 Sangle de batterie FPV : Theory X Moteur FPV 1407-282
FR Garantie et réparations Durée de la garantie Garantie exclusive - Horizon Hobby, LLC (Horizon) garantit que le Produit acheté (le « Produit ») sera exempt de défauts matériels et de fabrication à sa date d’achat par l’Acheteur. La durée de garantie correspond aux dispositions légales du pays dans lequel le produit a été acquis. La durée de garantie est de 6 mois et la durée d’obligation de garantie de 18 mois à l’expiration de la période de garantie.
FR Coordonnées de Garantie et réparations Pays d’achat Union européenne Horizon Hobby Numéro de téléphone/E-mail Horizon Technischer Service service@horizonhobby.de Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100 Adresse Hanskampring 9 D 22885 Barsbüttel, Germany IC Déclaration IC: 6157A-DXE Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
©2018 Horizon Hobby, LLC. Blade, the Blade logo, Scimitar, Thrust, DSM, DSM2, DSMX, Bind-N-Fly, BNF, the BNF logo, ModelMatch, Focal and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks or logos are property of their respective owners. US D774,933.