User Manual
7
EN
Servo Setup
FUNCTION LISTSYSTEM SETUP
DX8
SYSTEM SETUP
Model Type Airplane
F-Mode Setup
Switch 1 Switch B
Switch 2 Inhibit
Channel Assign
Channel Input
1 Throttle N/A
2 Aileron N/A
3 Elevator N/A
4 Rudder N/A
5 Gear B
6 AUX 1 I
Chan Travel Reverse
THR 100/100 Normal
AIL 100/100 Normal
ELE 100/100 Normal
RUD 100/100 Normal
GER 100/100 Normal
Chan Travel Reverse
AX1 100/100 Reverse
AX2 100/100 Normal
AX3 100/100 Normal
AX4 100/100 Normal
Servo Setup
FUNCTION LIST
DX6, DX7 (Gen 2), DX9, DX18
Timer
Mode Count Down
Time 5:00
Start Throttle Out
Over 25%
One Time Inhibit
D/R & Expo
Chan
Switch (F) Pos
D/R Expo*DX6
DX7, 9,
18
AILE
0 0 100/100 0
1 100/100 0
1 2 75/75 0
ELEV
0 0 100/100 0
1 100/100 0
1 2 75/75 0
RUDD
0 0 100/100 0
1 100/100 0
1 2 75/75 0
D/R & Expo
Chan
Switch Pos (AIL D/R)
D/R
Expo*
AILE
0 100/100 0
1 100/100 0
2 75/75 0
ELEV
0 100/100 0
1 100/100 0
2 75/75 0
D/R & Expo
Chan
Switch Pos (AIL D/R)
D/R
Expo*
RUDD
0 100/100 0
1 100/100 0
2 75/75 0
Chan Travel Reverse
THR 100/100 Normal
AIL 100/100 Normal
ELE 100/100 Normal
RUD 100/100 Normal
Chan Travel Reverse
GER 100/100 Normal
AX1 100/100 Reverse
AX2 100/100 Normal
Model Type ACRO
SW Select
Trainer Aux 1
F Mode Gear
All Others INH
Camera Control/
Continuous Flip**
Bind / I Button
Press twice rapidly (within 2 seconds) = still photo (rear LEDs blink once)
Press and hold 3 seconds = start/stop video (rear LEDs slowly fl ash while recording)
** If no camera is installed, pressing and holding the Bind button while in FM0 enables
the continuous fl ip feature (see the Flight Mode Selection section for details).
Camera Control/Continuous Flip**
Bind / I Button
Press twice rapidly (within 2 seconds) = still photo (rear LEDs blink once)
Press and hold 3 seconds = start/stop video (rear LEDs slowly fl ash while recording)
** If no camera is installed, pressing and holding the Bind button while in FM0 enables
the continuous fl ip feature (see the Flight Mode Selection section for details).
* Use of "Expo" is not necessary for successful fl ight. The pilot may adjust this setting to tailor the sensitivity around
neutral if desired.
Flight Mode Operation
Sw B: Pos 0 = Stability Mode
Pos 1 = Stagility Mode
Pos 2 = Agility Mode
Flight Mode Operation
FMODE Sw: Pos 0 = Stability Mode
Pos 1 = Stagility Mode
Pos 2 = Agility Mode
Timer
Mode Count Down
Time 5:00 Tone
Start Throttle Out
Pos 25%