Scimitar 170 FPV Manual
9
EN
Band
CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
Band A 5865 5845 5825 5805 5785 5765 5745 5725
Band B 5733 5752 5771 5790 5809 5828 5847 5866
Band E 5705 5685 5665 5665 5885 5905 5905 5905
FS/IRC 5740 5760 5780 5800 5820 5840 5860 5880
RaceBand 5658 5695 5732 5769 5806 5843 5880 5917
Band CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
Band A 5865 5845 5825 5805 5785 5765 5745 5725
Band B 5733 5752 5771 5790 5809 5828 5847 5866
FS/IRC 5740 5760 5780 5800 5820 5840 5860 5880
RaceBand 5658 5695 5732 5769 5806 5843 5880 5917
Using the Video Transmitter
Available Frequencies, North America (mHz): (BLH02200, BLH02280)
Available Frequencies, European Union (mHz): (BLH02280EU)
Consult local laws and ordinances before operating FPV equipment.
In some areas, FPV operation may be limited or prohibited. You are
responsible for operating this product in a legal and responsible manner.
See the Available Frequency table to fi nd the desired video channel and
band. The video transmitter channel and band are changed using the buttons
on the top of the quadcopter, as shown. There are two rows of LEDs visible
through the LED window. The row of red LEDs indicates the channel selected
(1-8). The row of blue LEDs indicates the selected band (A, B, E, F, R). The
green LEDs indicate the video transmitter output power level selected.
Only change the video channel and band when the video
transmitter is not transmitting a signal or is in Pit Mode.
If any of the green LEDs are glowing solid, see the
directions below to stop transmitting a video signal prior to
changing the channel or band.
Channel and Band Selection:
1. A short press of button B will change channels. Quickly
press and release the button once for each channel
until the desired channel is reached.
2. A long press of button B will change the band. Press
and hold button B for several seconds and release for
each band change.
Power Level Selection:
1. Press and hold button A to change the power output. All green LEDs off means RF is off, one fl ashing green LED is Pit Mode, one
solid green LED is 25mW, two solid green LEDs is 200mW, three solid green LEDs is 600mW.
8
7
6
5
4
3
2
1
R
F
E
B
A
Button B
Button A
Channels
Bands
Power
Level
LED window
Buttons