Scimitar 215 Manual

4
EN
First Flight Preparation
• Remove and inspect contents
• Begin charging the fl ight battery
• Assemble the aircraft
• Program your computer transmitter
• Install the fl ight battery in the aircraft
(once it has been fully charged)
• Bind your transmitter
• Familiarize yourself with the controls
• Find a suitable area for fl ying
Flying Checklist
Always turn the transmitter on fi rst
Plug the fl ight battery into the lead from the ESC
Allow the ESC to initialize and arm properly
Fly the model
Land the model
Unplug the fl ight battery from the ESC
Always turn the transmitter off last
Transmitter Setup
Installing the Propellers
Timer
Mode Count Down
Time 3:00
Start Throttle Out
Over 25%
One Time Inhibit
Servo Setup
Chan Travel Reverse
THR 150/150 Normal
AIL 148/148 Reverse
ELE 148/148 Normal
RUD 148/148 Reverse
GER 100/100 Normal
AUX1 100/100 Normal
FUNCTION LIST
D/R & Expo
Chan Switch Pos D/R Expo
AILE
0 100/100 0
1 100/100 0
2 100/100 0
ELEV
0 100/100 0
1 100/100 0
2 100/100 0
SETUP LIST
F-Mode Setup
Switch 1 Inhibit
Switch 2 Inhibit
Model Type
Airplane
Channel Assign
Channel Input Confi g
1 Throttle
2 Aileron
3 Elevator
4 Rudder
5 Gear Switch B
6 Aux 1 Switch H
Frame Rate
11ms*
DSMX
DX6, DX6e, DX7 (Gen 2), DX8 (Gen 2), DX9, iX12, DX18, DX20
CW
CW
CCW
CCW
Switch Functions
Flight Mode Switch = Switch B
Motor Arm Switch = Switch H
* The DX6e operates at 22ms frame rate and cannot be changed.
1. Refer to the illustration for the proper motor rotation and
propeller location.
2. The propellers have “CW” or “CCW” marked on one
blade to show proper location and rotation. Match the
propeller location to the illustration.
3. Secure the propellers using the provided lock nuts.
Do not overtighten the nuts as damage to the propellers
or motors may result.
To download the setup fi le for the Spektrum
DXe transmitter, refer to www.spektrumrc.com.
For telemetry setup information, refer to your transmitter manual or www.spektrumrc.com.