User Manual

Bind
Throttle Hold
Du al Rate Switch
Installing the DXe Transmitter Batteries (RTF)
DXe Transmitter Control (RTF)
The LED indicator fl ashes and the transmitter beeps progressively faster as the battery volt-
age drops.
Replace the transmitter batteries when the transmitter begins to beep.
A
B
C
D
E
F
G
LED Indicator
ABCDEFG
Mode 1
Aileron (Left/Right)
Throttle (Up/Down)
Throttle Trim Aileron Trim ON/OFF Switch Rudder Trim Elevator Trim
Rudder (Left/Right)
Elevator (Up/Down)
Mode 2
Aileron (Left/Right)
Elevator (Up/Down)
Elevator Trim Aileron Trim ON/OFF Switch Rudder Trim Throttle Trim
Rudder (Left/Right)
Throttle (Up/Down)
5
EN
Program your transmitter before attempting to bind or fl y the helicopter. Transmit-
ter programming values are shown below for the Spektrum DX6i, DX7s, DX6, DX7,
DX8, DX9, DX18 and DX20.
The fi les for transmitters using Spektrum
AirWare
™
are also available for download
online at www.spektrumrc.com.
To use a Spektrum
™
DXe transmitter other than the one included in the RTF version,
download the Blade
®
330 X DXe model setup available at
www.spektrumrc.com or use the appropriate programming cable and the PC or
mobile app to program the transmitter.
Transmitter Setup (BNF)
DXe
D/R & Expo
Chan Sw Pos D/R Expo
AILE
0 100 0
185 0
ELEV
0 100 0
185 0
RUDD
0 100 0
185 0
Timer
Down Timer 4:00
Switch THR CUT
ADJUST LISTSETUP LIST
DX6i
Throttle Curve
Switch Pos (F Mode) Pos 1 Pos 2 Pos 3 Pos 4 Pos 5
NORM 0 50 50 50 50
STUNT* 65 65 65 65 65
TRAVEL ADJ
Channel Travel
THRO 100/100
AILE 100/100
ELEV 100/100
RUDD 100/100
GYRO 100/100
PITC 100/100
REVERSE
Channel Direction
THRO N
AILE N
ELEV N
RUDD N
GYRO N
PITC R
GYRO
RATE SW-F.MODE
0 60% NORM 0
1 50% STUNT 1
Modulation Type
AUTO DSMX-ENABLE
D/R COMBI
D/R SW AILE
Model Type HELI
Swash Type
1 servo
Normal
Pitch Curve
Switch Pos (F Mode) Pos 1 Pos 2 Pos 3 Pos 4 Pos 5
NORM 25 37 50 75 100
STUNT 0 25 50 75 100
HOLD 25 37 50 75 100
Fli ght Mode Switch
0 = Normal Mode
1 = Stunt Mode 1
2 = Stunt Mode 2