Installation Sheet

WWW.BLANCOAMERICA.COM 1
Front Apron Fireclay Installaon Guide
CAREFULLY READ THESE INSTRUCTIONS BEFORE YOU BEGIN
EXTREME CAUTION: Sinks are extremely heavy. For personal safety, always use extra personnel for moving or
installaon.
REVERSIBLE FRONT APRON: The BLANCO CERANA apron sink is a reversible style design with dierent installaon
dimensions depending on which front apron side you choose to remain seen aer installaon. SPECIAL CARE SHOULD BE
TAKEN BY THE COUNTERTOP FABRICATOR TO ENSURE THE CORRECT CUT OUT. Please note that both long sides of the apron
sink have DIFFERENT RADII corners which will aect the nal installaon. Fabricators should take extra care in conrming
which front apron side of the sink will be shown aer installaon to ensure the stone is cut to the appropriate corner radii.
INSPECTION: BLANCO requires that the sink be thoroughly inspected prior to installaon for any damage.
Dimensional Data:
Pre-Sink Installaon Planning
This installaon assumes the use of a custom cabinet and countertop design. BLANCO recommends that a professional
installer be used.
Again, please note that the BLANCO CERANA apron sink is a reversible style design with dierent installaon dimensions
depending on which front apron side you choose to remain seen aer installaon.
To achieve the desired nished t and form, it is crical that the cabinet maker, cabinet installer, and countertop fabricator
fully unde
rstand the consumer’s requirements regarding the nal installed look.
A custom sink base and support system is required for installaon of BLANCO reclay sinks. Whether the sink is used for
replacement or new installaon, the cabinet area beneath the sink MUST be reinforced to provide sucient support. A
wood or metal support frame for the sink must support 400 pounds (approximate weight of sink when full and a garbage
BLANCOCERANA
TM
SERIES

Summary of content (2 pages)