Installation Guide

Farmhouse #1

HEIGHT

STEP 1 (Recommended for professional installers only.)

Prepare the sink base cabinet.

Apron style sinks require a special sink base cabinet with a front cutout and

a platform built in place to support the sink. (illustration A)

INS TALLATION IN STR UCT ION S UN DER MOU NT SIN KS

APR ON STY LE

MODEL DESCRIPTION LENGTH x HEIGHT

501-113-AT Single Bowl 30" x 10-1/2"

with Towel Bar

501-113-A Single Bowl 30" x 10-1/2"

without Towel Bar

501-117-A Double Bowl 32" x 9"

Build a plywood platform to support the weight of

the sink and attachments. The platform should be

attached with braces to the sink cabinet, allowing

for the top of the sink to reach the bottom of the

countertop material. Be sure to allow space for

water line supplies and drain hole/garbage

disposal clearance. (illustration B)

Fit the sink to the cabinet opening.

The opening in the front face of the sink base

cabinet can be modiﬁed to ﬁt on the job site.

Be sure to have ﬁller strips on site in case any

adjustments need to be made in the depth or width of the sink base cabinet cutout.

Double check measurement of cabinet cutout and make any necessary adjustments by either adding

ﬁller strips or sanding the opening.

Blanco stainless steel Apron style undermount sinks are designed so that the apron sits forward

approximately 1" out from the face of the cabinet.

Cabinet openings for undermount installation

of Blanco Apron style sinks (see diagram):

illustration A

illustration B