User manual

8
USE
1 Programme Chart
This will help you to select the correct
programme for drying.
2 Low Temperature Button
Press this button to reduce the temperature when
drying particularly delicate items.
To be used when drying synthetics with the
time controlled programme.
3 Buzzer Off Button
Press this button if you do not wish the buzzer to
ring during the «anti-crease» phase.
4 Start Button
Press this button for 2 seconds to start the
selected drying programme.
If the door is opened during drying, this button
has to be depressed after closing the door to
allow the programme to continue.
5 Drying Light
This light indicates that the machine is
performing the drying phase.
6 Cool Tumbling Light
This light will illuminate when the cooling phase
is in operation. This starts 9 minutes before the
end of drying to prevent any creasing or
crumpling of fabrics.
7 Door Ajar Light
This light flashes when the door is opened or not
well closed.
8 End of programme & Clean Filter
Light
This light comes on at the end of the drying
programme and remains alight until the door is
opened or the selector dial is turned to “0”.
This light will also remind you that the filter
should be cleaned at the end of each drying
cycle.
9 Mains-On Light
This lights up by selecting the drying programme
and goes out when the programme selector dial
is turned to «0».
10 Programme Selector Dial
To set the machine to the selected programme or
time, turn the dial until the letter or the time you
want coincides exactly with the pointer.
Control panel
SELECTOR
BUZZER
OFF
LOW
TEMP
START
MAINS ON
MANUAL OVERRIDE : SEE INSTRUCTION BOOK FOR TIMES
D
A
B
C
EXTRA DRY
STORE DRY
IRON DRY
COTTON LINEN
STORE DRY
SYNTHETICS
BCD 306
COOL TUMBLING
FLASHING-DOOR AJAR
DRYING
END OF PROGRAMME
CLEAN FILTER NOW
ON/OFF
1 2 3 4 5 678 9 10