User manual

12
Operating sequence
1. Place the laundry in the drum
Place the garments to
be washed inside the
drum one by one laying
them as flat as possible.
Close the door ensuring
that the catch clicks into
place.
2. Measure out the detergent into the
dispenser drawer
Pull out the detergent
dispenser drawer from
the control panel.
Pour the detergent into
the main wash compart-
ment. Follow the deter-
gent manufacturer’s gui-
delines for the amount
required.
If you wish to carry out
the extra prewash, pour the amount of detergent
required into the «prewash» compartment.
3. Add the liquid additive if required.
Pour the softener, if
required, into the com-
partment marked .
Do not exceed the MAX
level.
4. Depress the required button.
5. Select the required programme and
start the machine
Plug into the mains.
Turn on the water taps.
Check that the drain hose is correctly positioned.
Turn the programme
selector dial clockwise
until the programme
coincides with the
marker.
Depress the ON/OFF
button: the «mains on»
light will come on and the
machine will start opera-
ting.
At the same time the light
on the loading door will
illuminate indicating that
the door is blocked.
6. At the end of the programme
The appliance stops automatically.
If you have selected the RINSE HOLD option drain
the water before opening the door.
The door cannot be opened if water is present in
the tub.
Wait one or two minutes before opening the door
to give the electric locking mechanism time to release
it. The door can be opened when the door locked light
goes out.
Release the ON/OFF button to switch the machine
off. The mains-on light goes out.
Release the button previously depressed.
Turn the water taps off and unplug the machine from
the mains.
Open the loading door and remove the laundry.
Ensure that the drum is completely empty by turning it
with one hand.
Leave the door ajar for a while to eliminate the steam.
P0004
P0092
P0091
B
P0034
P0045