User Manual

10.) Program Monitor Lights
Program flow can be monitored via program monitor lights on
control panel.
• Wash
•
Rinse
•
End
11.) Remaining Time Indicator
Remaining Time Indicator displays the program times and
remaining time during the program is in operation. In addition, you
can adjust program delay time by pressing the buttons on the
indicator before program starts. If you want to change delay time,
you can set the time by pressing St
art/Pause button and using
buttons on the indicator. Press Start/Pausebutton again in order
to activate.
Child Lock Operation
In order to activate child lock, press “+” and “–” buttons on
for 3 seconds. At this
ylsuoenatlumis rotacidni emit gniniameR
time, "CL" appears for 2 seconds on remaining time indicator.To
inactive child lock, press “+” and “–” buttons again simultaneously
for 3 seconds. "CL" will blink once.
8.) Start/Pause Button
Once you press the Start/Pause button, the programme you
selected with the programme selector button will start running and
the status indicator lamp “wash” will light up.In the stop
condition while wash led is On, Start/Pause led will blink.
9.)
Rinse aid Lack Warning indicator
In order to check that there is sufficient rinse aid in your machine
check rinse aid lack warning light on the display.When rinse aid
warning light starts coming on , fill in rinse aid chamber.
•
D
ry
5
Thus, washing up shall be done only on the lower basket of your
machine. In using this feature,make sure that there are no dishes
in the upper basket.
Note : If you have used an extra feature on the latest washing
program, this feature will remain active also on the next washing
program. If you do not want to use this feature on the newly
selected washing program, press the selected feature button
again, and check that the lamp on the button goes off.
6.) Door Handle
The door handle is used to open/close the door of your machine.
7.) Programme selector Button
With the program selector button, you can select a suitable
program for your dishes.
26