User manual

Before using your dishwasher for

the first time:

1. Ensure that the electrical and water connections

comply with the installation instructions

2. Remove all packaging from inside the appliance

3. Fill the rinse aid dispenser.

Rinse aid

Rinse aid is automatically added during the last rinse,

ensuring thorough rinsing, spot and streak free drying.

The dispenser, which is positioned inside the door,

holds about 110 ml of rinse aid, which is sufficient for

16 - 40 dishwashing programmes, depending upon the

dosage setting.

Filling with rinse aid

1. Open the container by turning the lid (A)

anticlockwise.

2. Add the rinse aid until the container is completely

full. The indicator (B) will be completely dark.

3. Top up the rinse aid when the indicator (B)

becomes clear.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid

compartment. Clean up any rinse aid spilt during filling

with an absorbent cloth to avoid excess foaming

during the next wash.

Adjusting the dose

According to the finish and drying results obtained,

adjust the dose of rinse aid by means of the 6 position

selector (C) (position 1 minimum dosage, position 6

maximum dosage).

Increase the dose if there are drops of water or lime

spots on the dishes after washing. Reduce it if there

are sticky whitish streaks on the dishes.

BR01

BR03

BR02