User Manual

6
Installation of your oven
TALLATION OF YOUR OV
To install the oven into the kitchen a cut out should be made in accordance with the dimensions shown in below.
Please allow for 3/ 4mm of a difference in the dimensions provided below. Please measure the original product
to ensure that the cut out details are correct.
The apparatus is to be fastened to the top by means of the two screws provided in the kit through the holes made
on the oven uprights.
The cabinet in which the apparatus is installed shall be open on the back side to ensure a sufficient air circulation
and prevent overheating.
Leave a gap of at least 20 cm
2
for air circulation if the oven is installed in a column; this is not necessary if the oven
is installed under the work top.
WARNING
As the apparatus is to be fitted in your kitchen furniture, make sure that all surfaces in contact with the
oven can resist a temperature of approx 90°C.
Overall
product
Dimensions
595 mm
Height
595 mm
Width
550 mm
Depth