Specifications Sheet

Model Code
RUL90X – 90cm, Stainless Steel
Description
Undercupboard Rangehood with LED lighting
Optional Accessories
Carbon Filter – ACK62260 (pack of 2)
Warranty
BLANCOCare™ 2 years parts & labour
Specifications
RUL90X
Undercupboard Rangehood
`v
`v
`v
Features Benefits
Intensive Speed Function
Filter Saturation Alarm
Push Button Controls with LED display
Clean Air Function
723m3/hr Air Movement
Timer
2 X 2.5W LED Lights
Perimeter Air Extraction System
This provides additional air movement for a period of 10 minutes.
After 10 minutes it will return to original speed setting.
Display will indicate when the aluminium grease filter and carbon
filter needs to be replaced.
Push button controls with 4 speeds (including intensive) to suit your
cooking needs.
Function can be activated once the rangehood has been turned off.
Rangehood will ‘activate’ for 10 minutes every hour to help reduce
the lingering cooking odour (after cooking is complete).
Cleaner air and reduction of condensation helps to protect kitchen
surfaces such as walls and cabinets from grime and build up.
Rangehood will continue to function on the chosen speed for 15
minutes. After which time the rangehood will automatically switch
off.
Delivers brighter, clearer visibility when cooking. LED lighting also
provides lower energy consumption than other lighting, as well as
longer bulb life.
Air extraction is directed to the perimeter of the stainless steel panel,
increasing the efficiency of airflow and effectiveness of the air
extraction.
Method of installation: Can be ducted or recirculated
Dimensions: 860W x 294D (mm)
Motor: Single Motor
Power requirement: 240 V - 10 Amps
Airflow: 723m3/hr
Fan: 4 Speed
Ducting: Top only or recirculating
(carbon filters recommended for recirculated
installation)
Ducting spigot: 120 - 150mm
Noise level: 73dB
Filters: 1 x aluminium grease filter
Min height above cooktop: 650mm to lowest point of rangehood
Note:
Measurements are within +/-2 - 3mm factory tolerance. It is advisable to check dimensions of
physical product when measuring for installation and before doing any cut outs.
Due to continual product development the information provided is not final and may be subject to
change.