Specification

Product Name: Corrosion Stop
Product Code: 16-CSP
Date: 1/6/16
Total pages: Page 2 of 7
2
Pictograms
Signal Word: Danger
Hazard Statement(s)
H222 Extremely flammable aerosol
H229 Pressurized container: may burst if heated
H280 Contains gas under pressure, may burst if heated
H335 May cause respiratory irritation
H336 May cause drowsiness
H304 May be fatal if swallowed and enters airways
H315 Causes Skin irritation
H319 Causes serious eye irritation.
H400 Very toxic to aquatic life
H410 Very toxic to aquatic life with lasting effects
Precautionary Statements:
P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No
smoking.
P251 Pressurized container: Do not pierce or burn, even after use
P261 Avoid breathing dust/fume/gas/mist vapors/spray
P264 Wash…thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 If Swallowed: Immediately call a poison center or doctor
P304+P340 If Inhaled: Remove person to fresh air and keep comfortable for breathing.
P332+P352 If skin irritation occurs: wash with plenty of water and soap.
P403+P233 Store in well ventilated place Keep container tightly closed.
P410+P412 Protect from sunlight. Don not expose to temperatures exceeding 50°C/122°F
P501 Dispose of contents/container in accordance with local/regional regulations.
Ingredients
Acetone
CAS #
67-64-1
Percent
20-25%
n-Heptane
142-82-5
25-30%
Toluene
108-88-3
0-2%
Petrolatum
8009-03-8
25-35 %
Liquefied Petroleum Gas
68476-86-8
15-25 %
Eye Contact:
Flush with warm water for 15 minutes. Seek medical attention.
3. Composition Information on ingredients
4. First Aid Measures