MSDS

May aggravate a pre-existing skin and respiratory disorders.
Physical Hazard: Aerosol containers are pressurized (even when empty!) Do not expose to temperatures above 120
0
F. Do
not puncture or burn can. Failure to observe these precautions may result in rapid and violent decompression of the container
producing projectiles and atomization of the liquid contents.
Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and
nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
FIRST AID MEASURES
4
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Continuie to monitor. Get medical attention.
Inhalation:
Remove contaminated clothing immediately! Wash skin with soap and water. If irritation develops,
seek medical attention.
Skin Contact:
Flush eye(s) with water for 15 minutes. Get medical attention. If eye irritation presists, obtain
medical treatment.
Eye Contact:
Do not induce vomiting.! Get medical attention immediately!Ingestion:
FIRE FIGHTING MEASURES
5
Flashpoint: 130
0
F (TCC)
Unusual Fire & Explosion Hazard: Level 3 Aerosols -
Contents Under Pressure
Extinguishing Media:
Dry chemical. Carbon dioxide, halon or foam.
ACCIDENTAL RELEASE MEASURES
6
Spill or Leak Procedure:
Leaking cans should be put into suitable container until the internal pressure has dissipated.
Waster Disposal Method: Empty aerosol cans should be punctured and drained. Can and contents can then be incinerated.
Dispose of in accordance with local, state and federal regulations.
HANDLING AND STORAGE
7
Use in accordance with good industrial workplace practices. Avoid unnecessary contact.
Wash thoroughly after handling. Use with good ventilation.
Handling Precautions:
Store in a dry place away from excessive heat. Store containers with lids on and properly
labeled.
Do not store at temperatures above 120 degrees F.
Storage Requirements:
GDL - Garage Door Lube
Material Safety Data Sheet
Revision Date: 03/25/09MSDS Number: GDL Aerosol
Page of
2 6
MSDS
The Blaster Corporation