SDS
Silicone Lubricant
Safety Data Sheet
according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012.
10/20/2020
EN (English US)
3/6
6.3. Methods and material for c
For containment
ontainment a
:
nd cleaning up
Absorb and/or contain spill with inert material (sand, vermiculite or other appropriate material),
then place in suitable container. Do not flush into surface water or sewer system. Wear
recommended personal protective equipment.
Methods for cleaning up
:
Sweep or shovel spills into appropriate container for disposal. Provide ventilation.
For further information refer to section 8: "Exposure controls/personal protection"
Additional hazards when processed
:
Pressurized container: Do not pierce or burn, even after use. Hazardous waste due to potential
risk of explosion.
Precautions for safe handling
:
Keep away from sources of ignition - No smoking. Avoid contact with skin and eyes. Avoid
breathing dust/fume/gas/mist/vapors/spray. Do not swallow. Handle and open container with
care. When using do not eat, drink or smoke. Do not spray on an open flame or other ignition
source.
Hygiene measures
:
Wash contaminated clothing before reuse. Always wash hands after handling the product.
Technical measures
:
Proper grounding procedures to avoid static electricity should be followed.
Storage conditions
:
Keep out of the reach of children. Store locked up. Store in a cool, well-ventilated place. Protect
from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Keep in fireproof place.
Alkanes, C9-11-iso- (68551-16-6)
Not applicable
Petroleum distillates, hydrotreated light (64742-47-8)
Not applicable
Carbon dioxide (124-38-9)
ACGIH
ACGIH TWA (ppm)
5000 ppm
ACGIH
ACGIH STEL (ppm)
30000 ppm
OSHA
OSHA PEL (TWA) (mg/m³)
9000 mg/m³
OSHA
OSHA PEL (TWA) (ppm)
5000 ppm
IDLH
US IDLH (ppm)
40000 ppm
NIOSH
NIOSH REL (TWA) (mg/m³)
9000 mg/m³
NIOSH
NIOSH REL (TWA) (ppm)
5000 ppm
NIOSH
NIOSH REL (STEL) (mg/m³)
54000 mg/m³
NIOSH
NIOSH REL (STEL) (ppm)
30000 ppm
Appropriate engineering controls
:
Ensure good ventilation of the work station.
Environmental exposure controls
:
Avoid release to the environment.
Hand protection:
Wear suitable gloves
Eye protection:
Safety glasses or goggles are recommended when using product.
Skin and body protection:
Wear suitable protective clothing
Precautions for safe handling
7.1.
SECTION 7: Handling and storage
6.4. Reference to other sections
7.2. Conditions for safe storage, including any incompatibilities
Control parameters
8.1.
SECTION 8: Exposure controls/personal protection
8.2. Appropriate engineering controls
8.3. Individual protection measures/Personal protective equipment