MSDS

PRODUCT AND COMPANY IDENTIFICATION
1
Manufacturer:
The Blaster Corporation
8500 Sweet Valley Drive
Valley View, Ohio 44125
[phone]
[phone] fax
www.blasterproducts.com
24 Hour emergency contact:
Chemtrec [phone]
TDL - The Dry Lube
03/18/09
TDL - aerosol
16-TDL
Product Name:
Revision Date:
MSDS Number:
Product Code:
COMPOSITION/INFORMATION ON INGREDIENTS
2
Hazardous Ingredients CAS # Percent Exposure Limits
Polytetrafluoroethylene 9002-84-0 <5%
OSHA (PEL)- 5 mg/m3 dust
Hexane(s) 110-54-3 >85%
OSHA (TWA)- 500 ppm 1800 mg/m3
ACGIH (TWA)- 500 ppm
Carbon Dioxide 124-38-9 <3 OSHA (TWA)- 5000 ppm
ACGIH (TWA)- 5000 ppm
HAZARDS IDENTIFICATION
3
Eyes, skin, inhalation, ingestionRoute of Entry:
Target Organs:
Inhalation of spray mist likely to cause irritation to the respiratory tract. May cause headache,
dizziness, nausea, vomiting or narcosis in confined or poorly ventilated areas.
Inhalation:
Repeated or prolonged contact with skin may cause mild irritation and possibly dermatitis.Skin Contact:
Likely to cause immediate or delayed irritaion. Irritation will show as redness and/or swelling of the
eyes.
Eye Contact:
Ingestion may cause irritation to the mouth, esophagus and stomach. May cause abdominal pain,
vomiting, dizziness and headaches.
Ingestion:
May aggravate a pre-existing skin and respiratory disorders.
Physical Hazard: Aerosol containers are pressurized (even when empty!) Do not expose to temperatures above 120
0
F. Do
not puncture or burn can. Failure to observe these precautions may result in rapid and violent decompression of the container
producing projectiles and atomization of the liquid contents.
TDL - The Dry Lube
Material Safety Data Sheet
Revision Date: 03/18/09MSDS Number: TDL - aerosol
Page of
1 6
MSDS
The Blaster Corporation